See what our Experts say about this CE Smith Boat Trailer Parts

• Length Of Shaft Needed For 12" Roller With End Caps On Both Ends
  Hi Melissa, You can definitely install 2 of # YR224-5 end caps on the ends of the # DL21554 while on the # CE10305G bracket, but not with the # CE10727A roller shaft. Each end cap will add 1-1/2" of length so you would need a roller that is at least 15-1/2" long to accommodate the extra length and a little more for the pal nuts to have a good purchase area. That said, we do not have one in that specific length so your best bet would be to grab the Roller Shaft w/Cap Nuts 19" x 5/8" #...
  view full answer...
• Recommended Keel Roller For Best Weight Capacity on Boat Trailer
  The Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 18" Long - 5/8" Shaft # YR18244-165EC is not weight rated. The weight of the boat will actually be on the bracket and the 5/8 inch shaft that runs through the heavy-duty roller. Your application with the front weight the roller is more likely to bend the longer you make the roller. For instance the 18 inch roller along with the brackets # CE10500G and Roller Shaft w/Cap Nuts 19" x 5/8" # 107-30A will be more likely...
  view full answer...
• Longer Roller Shaft Recommend to Install Endcaps on CE Smith Deep V Keel Roller Assembly # CE10405G
  To install the endcaps part # YR134-5 on the ends of the roller of the CE Smith Deep V Keel Roller Assembly # CE10405G you will need to get a longer 5/8 inch shaft so that there is enough room for the endcaps to secure on either side of the bracket. The roller shaft that would most likely work the best for you would be the 19 inch 5/8 inch diameter roller shaft # 107-30A. You will need to measure your setup to be sure this would work for you though.
  view full answer...
• Need 14-Inch x 5/8-Inch Roller Shaft for Boat Trailer
  We offer part # 107-30A from C E Smith which includes cap nuts and measures 5/8-inches in diameter by 19-inches in length. You can use this item and cut it down to the required length for your specific application.
  view full answer...
• What is the Widest Keel Roller for a Boat Trailer
  Thanks for reaching out, Michael! The widest roller we have is the 18" Long Yates Keel Roller for Boat Trailers # YR18244-165EC which installs on a trailer using the CE Smith Universal-Fit Split Panel Brackets # CE10500G, the 19" Roller Shaft w/Cap Nuts # 107-30A, and either bolting into the trailer frame or around it with U-Bolts. Since I'm not sure what the size of your frame is I've gone ahead and added a link to our U-Bolt kit selection for you to filter through, but I'd be more than...
  view full answer...
• Trailer Roller Bunks and Keel Roller Recommendations for a River Raft
  It sounds like you are looking for roller bunks such as # DL21741. These are 5 foot long sections (2 in a package) and are the longest we have available. Each section has 12 sets of rollers. They can be mounted directly to a wooden bunk or to the frame by using bracket kit # DL21742. If you are looking for a keel roller we have a 5-1/2 inch model # YR5244-105EC but no 6 inch. The next size up is 8 inches. With it you can use shaft # CE10722A with brackets # CE32004G or # CE10301G.
  view full answer...
• How to Make 18 inch Keel Roller Bracket
  We have what you would need to make a roller bracket for the 18 inch keel roller part # YR18244-165EC. For that you would need the roller part # 107-30A and then the universal brackets # CE10500G.
  view full answer...
• Roller Shafts for 12 and 18 Inch Bow Rollers
  We do indeed have the roller shafts you are needing. For the 18 inch roller, use part # 107-30A, which includes the pal nuts for the end of the roller shaft. For the 12 inch roller, you can use # CE10727A, which also includes the pal nuts.
  view full answer...
• Is the Steel Shaft Included With the Yates 18 Inch Keel Roller For Boat Trailers
  The Yates Keel Roller For Boat Trailers, # YR18244-165EC, does not come with the steel shaft, but we do carry a steel shaft that will fit this keel roller. You will want to pick up the 19 inch long x 5/8 inch diameter roller shaft, # 107-30A.
  view full answer...
• Roller Shaft Recommendation with Pal Nuts for an 18 inch Long Keel Roller # YR18244-165EC
  For a roller shaft with a 5/8 inch diameter that comes with pal nuts that would work with an 18 inch long keel roller like the part # YR18244-165EC you would want the part # 107-30A. This is a 19 inch long shaft that is 5/8 inch in diameter and comes with pal nuts. This is the longest one we offer in 5/8 inch diameter.
  view full answer...
• Shaft with Caps and Mounting Bracket Recommendation for the Yates Keel Roller # YR18244-165EC
  The recommended shaft for with the Yates Rubber Boat Trailer Parts # YR18244-165EC that you referenced is the Roller Shaft w/Cap Nuts # 107-30A. This comes with caps as well. If you needed mounting brackets you would also want the part # CE32004G.
  view full answer...

Do you have a question about this Boat Trailer Part?