What Are The Dimensions Of The Watchdog Surge Protector HU82VR?

Question

Question:

Power Watchdog Surge Protector with Bluetooth, WiFi, and Emergency Shut Down - Hardwired - 50 Amp. In-line. What are the dimensions. I have limited space. Gary 704-202-8712

asked by: Gary

0

Expert Reply:

Hey Gary,

The Dimensions of the Watchdog Surge Protector # HU82VR are 11-1/2" long x 6-1/2" wide x 4" deep. Perfect for mounting somewhere inside a cabinet or storage compartment.

How much space do you have to install something like this?

expert reply by: Nick S

0

Nick S.

9/8/2025

Hey Gary, did the dimensions of the Watchdog Surge Protector work for your limited space? I'm asking because your experience could help others with similar space constraints.

Answer 1

Hi Steve, I checked with our team that handles this and can confirm the hardwired, 50 amp Power Watchdog Surge Protector with Bluetooth, WiFi, and Emergency Shut Down #HU82VR is the Gen II version.

view full answer...

Answer 2

Hey Jeff, yes the Power Watchdog Surge Protector #HU82VR that you referenced can be used with a generator. We haven't had any issues with it and generators but I wonder if the problem is that the generators in question weren't pure sine wave…

view full answer...

Answer 3

Hi Ward; there is no specific size cable for the Power Watchdog Surge Protector #HU82VR. This is designed to be used with a 50 amp power cord like #A10-5025END with the pigtail end for hard wiring. The wire gauges vary within the cable itself. The…

view full answer...

Answer 4

For your Roadmaster BrakeMaster System w BrakeAway for RVs w Air or Air Over Hydraulic Brakes #RM-9160, I recommend swapping out the vehicle side connector with #RM-921004-50, and then the connecting hose should work as normal with #RM-450710 on one…

view full answer...

Answer 5

Hey Stanley. The app screen for the Power Watchdog Surge Protector with Bluetooth item #HU47FR is going to look like the picture I attached below. It'll show the wattage being used along with the amps and voltage. The Power Watchdog Surge…

view full answer...

Answer 6

Hello Thomas, thanks for reaching out. Sounds like you are looking for the replacement surge protection module for the Power Watchdog Surge Protector #HU82VR. If so, we have just the thing! You will need the following: - Replacement Surge Protection…

view full answer...

Answer 7

Hey Robert, The Power Watchdog Surge Protector #HU82VR can be installed on the shore power lines before the transfer switch. Since it's before the transfer switch it would only be tied to the shore power and wouldn't be an issue with the…

view full answer...

Answer 8

Hey Marc, yes you can use the 50 amp Power Watchdog Surge Protector #HU82VR with a 30 amp power source. It will work just fine without any issues.

view full answer...

Answer 9

You do not want to use the ASA to replace your duo therm. You're going to want to replace it with a Dometic unit #DMC33ZR instead.

view full answer...

Answer 10

That's because most of them are not compatible, especially if it's a different manufacturer. If by whole unit you mean the AC unit that sits on top and the diffuser box on the inside then no it won't matter. If you're just wanting to…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What Are The Dimensions Of The Watchdog Surge Protector HU82VR?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching