Hitch Reciever For A 2014 Open Range 416 RLS

Question

Question:

I’m looking for a hitch for my 2014 416 RLS open range fifth wheel camper.

asked by: Russell L

0

Expert Reply:

Hey Russell,

There are a couple options for you to get a hitch on that 5th wheel. We do not currently have a custom fit one for that specific trailer but we have some bumper mount, and frame mount universal options.

If your 5th wheel has a bumper I would recommend something like the # e38HR, etrailer RV bumper hitch 3500lbs. This fits bumpers that are 4" x 4" or 4" x 4 1/2", which are fairly standard bumper size. There are other sizes as well so I would need to know your bumper dimensions to find the right one for you.

For a frame mounted receiver I recommend # C13701, Curt Adjustable Hitch Receiver 5000lbs. This fits frame widths from 18" to 51" wide. This is a great option due to the fact it fits such a large range, it's going to work for many applications. It can either be bolted on with included brackets or welded on.

Do you know what size bumper you may have or your trailers frame width?

expert reply by: Nick S

0

Russell

5/13/2025

My frame it 77” wide

Nick S.

5/14/2025

@Russell Thanks for getting back to me! You will want to go with # UF35-946403, Ultra-Fab 2" Hitch. This will fit great on your 77" wide frame. Now this one is only rated for tongue weight, i.e. bike racks or cargo carriers. It is not rated for towing. Since that is the largest one we carry and the only one for 77" wide frames if you do intend to tow you may have to source elsewhere or get custom fabricated for your application. Are you looking to tow more with it?

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Hitch Reciever For A 2014 Open Range 416 RLS

Products Featured in This Question

Continue Researching