Is Red Grease Compatible with Green Grease Brand
Updated 09/26/2025 | Published 05/02/2025
Question:
I bought Green Greasethat is what it is called even though the grease is a pastel green to repack my boat trailer bearings. I have a camper that I recently repacked with Lucas Red N Tacky grease. If the next time I repack the camper bearings with Green Greasewhich is synthetic is it important that I completely remove the red grease or are the two compatible and I just semi clean the red out. Thanks, Experts.
asked by: Jerry
Expert Reply:
Hey Jerry, while we don't carry the Green Grease brand you have it is a synthetic polymer type grease which is compatible with the red grease that is in your hub currently so there's no need to worry about totally removing the red grease.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: propane cover
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: l68149
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Search Results: axle
- Search Results: trailer axles
- Search Results: terran axle trailer hubs and drums
- Search Results: drum brake kit
- Search Results: hub and rotor trailer brakes
- Shop: Lippert Brake Drum and Hub Kit - 3,500 lb Axles - 10" Diameter - 5 on 4-1/2 - 1/2" Studs
- Q&A: What is 5 on 4-1/2 inch Bolt Pattern for Trailer Wheel
- Q&A: MORryde CRE3000 vs Lippert Road Armor Cushioned Equalizers
- Q&A: Adding Electric Brakes To 2,200lb Dexter Torsion Axles
- Q&A: Comparing Road Armor, Dexter E-Z Flex, and MORryder CRE-3000 Equalizers For Jayco Eagle 325BHS
- Q&A: How is a 5 on 4-1/2 Trailer Wheel Bolt Pattern Measured
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
Jameson C.
9/26/2025
Hey Jerry, did you find that using the Green Grease worked well with the red grease in your camper bearings? I'm curious to know how it turned out, as it could help others in a similar situation.