Is There Trailer Hub that Has 5 on 5 inch Bolt Pattern
Updated 10/10/2024 | Published 10/09/2024
Products Featured in This Question
Question:
A 4x8 trailer with 5 x 4.5 hub. I want the hubs to match the rims I have for my car hauler which is 1/2" bigger. Is there a hub I can swap out to accommodate this without changing the entire spindle?
asked by: Rich
0
Expert Reply:
Hey Rich, it sounds like you are looking for a 5 on 5 inch bolt pattern trailer hub which we do offer but only if the axle is a 3,500 lb axle. For a hub/drum we have the part #AKHD-550-35-EZ-K or for an idler hub you'd want the part # AKIHUB-550-35-EZ-K.
expert reply by:
Jameson C
0
Continue Researching
- Search Results: l44610
- Search Results: trailer spindles
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Shop: Terran Axle Trailer Idler Hub Assembly for 3,500 lbs Axle - 5 on 5
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Q&A: Parts Needed to Replace a 3,500 lb Axle with 5 on 5 Inch Hubs
- Q&A: Looking For a Replacement 15 Tire and Wheel With 5 on 5 Bolt Pattern
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased
- Search Results: trailer tires and wheels
- Search Results: dexter 7000 lb axle bearings
- Search Results: lippert trailer hubs and drums
- Search Results: cotter pin
- Search Results: grease
- Q&A: Do You Still Have To Clean and Repack Dexter E-Z Lube Axles Once a Year
- Q&A: Is Red Grease Compatible with Green Grease Brand
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: Checking Out the Trailer Hub and Drum Assembly
- Video: Hands-On with the Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: Let’s Check Out the Trailer Idler Hub Assembly for 3,500-lb Axles
- Q&A: How Do I Know If I Have a #84 Spindle?
- Q&A: Differences Between Trailer Idler Hubs With a 5 on 5 Bolt Pattern
Rich
10/10/2024
I have 5-4.75 hub and my new rims are 5-4.5! Would a 1" adapter w/ 12x1.5mm studs work? How much for a bearing seal kit for the 4.75? The cost of 4.5 hubs? I'm waying my options and any help.is appreciated. Thank you!!!