Power Cable for Jensen RV TV JTV3223DCS

Question

Question:

I have a 12v TV in my travel trailer, Jensen JTV3223DCS DLED. Which AC/DC Adapter would I need to use AC power?

asked by: Donald

0

Expert Reply:

Hey Donald, yes the power cable adapter part # ACDC3212 is a fit for your Jensen TV JTV3223DCS.

expert reply by: Jameson C

0

Donald

4/22/2025

Hello Jameson C! Thank you very much for your quick response!

Jameson C.

4/22/2025

@Donald Glad to help!

Answer 1

I wasn't able to find your exact part number TV but I believe you may have the JE3212LED which if so you'd then need the AC/DC adapter part #ACDC3212 and you'd be set!

view full answer...

Answer 2

The Power Adapter Cord for Jensen LED Televisions - 12V DC #DCCIG09 will work with the Jensen LED Television #JTV32DC. You will want the AC/DC Power Adapter for Jensen Television #ACDC3212 if you ever want to use that television with AC power.

view full answer...

Answer 3

I pulled up pictures of your Forest River Puma Palomino and the ridges on the sides of it are horizontal and pretty wide so the awning rail of the slide topper you referenced #LCV000168110 would fit and work well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hey Lucian! There are definitely a lot of options out there, and the best is usually a mix of parts from different manufacturers. We don't have a package under a single part number but I can give you a list of parts for a complete setup. I…

view full answer...

Answer 12

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Power Cable for Jensen RV TV JTV3223DCS

Product Page this Question was Asked From

Continue Researching