Replacement Bearings for 2023 Winnebago Micro Minnie 2100BH FLX

Updated 04/16/2025 | Published 04/14/2025

Products Featured in This Question

Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

(1078)

$164.07

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2847)

$18.61

Question:

I have a 2023 Winnebago Micro Minnie 2100BH FLX with 3000lb Dexter Torsen Axles. I need the bearing seals for the 3k axles. All that I could find searching are for the older 3.5k axles they used to use.

asked by: Keith L

Expert Reply:

Hey Keith, can you send me a picture of your axle tag? I can use that to identify the bearings through Dexter. You will have to respond to the email that brought you to this answer page and attach the picture.

expert reply by: Robin H

Keith

4/15/2025

I looked all over my axles, and they don’t have a sticker on them.

Keith

4/15/2025

I looked at my job behind the wheel. It says 16MTI, 8-247, Drum Diameter 10.09”

Robin H.

4/16/2025

@Keith thanks, that is enough information to get you what you need. I went ahead and updated it below. You can see in the picture that the hub and drum have the same 8-247 you found on your assembly.

Expert Reply:

Normally I would be telling you to pull the hubs and double check without the tag but that Dexter hub number is enough. Dexter 8-247 hubs and drum assemblies like # 84546UC3-EZ use a standard 3,500 lb axle bearing combination. For replacement bearings and and seals you can use the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle # BK2-100.

expert reply by: Robin H