Will etrailer Anti-Rattle Device e38FV Rust

Question

Question:

Hi, will this product rust or will the tightening screw seize up? as I have the U bolt system and it really hard to change trailer balls. Thanks John.

asked by: John M

1

Helpful Expert Reply:

Hey John, the etrailer anti-rattle device part # e38FV is powdercoated steel so it's not going to rust. Are you in an area that gets a lot of salt on the roads in the winter?

expert reply by: Jameson C

1

Jameson C.

10/22/2025

Hey John, did the anti-rattle hitch collar hold up well against rust so far? Your experience could help others who deal with road salt or tough weather conditions.

Reply

Answer 1

Hey J H, the thickness of the etrailer anti rattle device part #e38FV is right at about 3/4 inches in width from where it attaches to the hitch opening. We've had no issues fitting this on trucks with the multipro tailgate though as we have found…

view full answer...

Answer 2

Hey Gary, thanks for reaching out. When using the etrailer Anti-Rattle Hitch Collar #e38FV, you will want to check the wing nut every time you tow. Anytime you change accessories, or load/unload you will want to check and make sure it is tight. As…

view full answer...

Answer 3

Hey Fred, that's a great question but you can leave the etrailer anti-rattle hitch collar part #e38FV on your hitch and you won't have to worry about it falling off without a ball mount installed.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Art, I was able to confirm with Hollywood Racks, the Sport Rider #HLY87RR can be used on a class B van! Generally, racks that can fold like the Sport Rider won't be rated for towable RVs or travel trailers. The reason is that they have…

view full answer...

Answer 6

Hey Guy, thanks for the information and welcome back! The best e-bike rated bike rack that is rated for use behind a motorhome is the Hollywood Racks Sport Rider SE item #HLY87RR. This is our only trike capable bike rack. It's rated to be used…

view full answer...

Answer 7

Hello Shawn, The 24x60 etrailer Enclosed Cargo Carrier for 2" Hitches - Steel - 440 lbs #e54VV is a great option for hauling your gear while keeping it protected. We do have a cover available for it as well! You will want the Cargo Cover for…

view full answer...

Answer 8

Hey Jim, thanks for the dimensions from both your trailer hitch on your Colorado and the coupler of your Scamp trailer. With that info what you need is a 1 inch rise from your ball mount with a 2 inch hitch ball. For that the Curt ball mount part…

view full answer...

Answer 9

Hi Susan; does that trike fold up so it can fit a standard bike rack? The way mentioned how it folds makes me believe it might be able to. If that is the case, you can use the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes #HLY64FR. This has…

view full answer...

Answer 10

Good afternoon Stephany, I'm sorry you had that less-than-stellar experience with the pin style anti-rattle device. Normally that setup works pretty well, but in some extreme towing situations, I definitely think the clamp style is better at…

view full answer...

Answer 11

Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…

view full answer...

Will etrailer Anti-Rattle Device e38FV Rust

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching