What Does Inno TIre Hold HD Bike Rack IN25RR Weigh

Question

Question:

What is the weight of the Inno IN25RR?

asked by: Todd M

0

Expert Reply:

Hey Todd, the Inno Tire Hold HD bike rack part # IN25RR weighs 53 lbs. Are you wanting as lightweight of a platform rack as you can get?

expert reply by: Jameson C

0

Todd M.

4/7/2025

Jameson, Thanks for the response. I plan to order the Inno INH120 (weighs ~ 49 lbs) for my two ebikes that weigh 54 lbs (with battery) each on my 2019 Honda Pilot. My only concern is clearing my driveway slope with the outside edge of the hitch rack tire hold. I do OK with my Thule Helium Pro 3-arm bike carrier on my driveway. With the INH120, what is the vertical distance from the centerline of the hitch arm to the elevation of the tire hold frame? Does the manufacturer of the INH120 have a design sketch with dimensions you could send me? Is the INH120 returnable if there is a problem with driveway clearance? Todd M

Jameson C.

4/7/2025

@ToddM The # INH120 has a rise built into the shank of 5-3/4 inches which means that from the top of the hitch opening to the bottom of the rack that would potentially drag is 5-3/4 inches. That most likely is enough to prevent dragging. If the rack were to get damaged or scratched while trying to determine if it has enough clearance it would not be returnable.

Answer 1

Hi Ian! The Hollywood Racks CrossTrack Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #HLY38RR is the updated version of the Hollywood Racks Crosstrack #HLY97RR. As soon as our stock of the #HLY97RR runs out, it will be gone. That said, they…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

What Does Inno TIre Hold HD Bike Rack IN25RR Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching