Installation Guide for Westin HDX Grille Guard # 57-2505 on 2013 Ford F-150

Question

Question:

Trying to mount brush guard on 2wd. Was told you had template to cut the valance

asked by: Lee L

0

Expert Reply:

The Westin HDX Grille Guard # 57-2505 that you referenced is a confirmed fit for the 2013 Ford F-150 either with or without the EcoBoost feature. The complete installation instructions from Westin have been sent to you in a separate email.

The trimming required is illustrated in figure 10 of the instructions. I have linked that image for you. You will need to trim both sides of the air dam.

expert reply by: Adam R

0

click to enlarge

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 4

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Answer 5

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 6

The 1-5/16" Hellwig Adjustable Big Wig Rear Anti-Sway Bars are designed for 2WD #HE97MR or 4WD #HE94FR versions of your 2021 Ford F-250. These are both designed for trucks which have a stock ride height. Hellwig does offer their 2" Lift…

view full answer...

Answer 7

Thanks for reaching out TY, happy to help! I can see how the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR instructions would be confusing. The first illustration is intended to show the assembly steps, so it can make it look like the end…

view full answer...

Answer 8

Hey John, the Hellwig rear sway bar part #HE44FR that you referenced is the correct rear sway bar for your 2024 Ford F-350 4WD and will do a great job reducing body roll and sway when off road.

view full answer...

Answer 9

Hey Cory, Air springs are going to be the best at leveling your F-350 back out once the weight is added but they will most likely affect your unloaded ride quality, even when aired down. That being said, a majority of the unloaded ride quality…

view full answer...

Answer 10

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 11

Hello Richard. Yes, the Hellwig Adjustable Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter #HE94FR will work great for your 2022 Ford F-350 Super Duty. Having the different wheel/tire size will not make a difference, and this anti-sway bar will…

view full answer...

Answer 12

Hey Joe, thanks for reaching out! You're going to want the Hellwig Adjustable Rear Anti-Sway Bar #HE44FR for your 2024 Ford F-350 Super Duty with the Tremor package.

view full answer...

Installation Guide for Westin HDX Grille Guard # 57-2505 on 2013 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching