How Many Spacers are Needed To Install the Air Lift 1000 Installed on a 2024 Jeep Wrangler Willy's

Question

Question:

I have a 2024 Jeep Wrangler WILLYS Edition - I want to double check which spacers I will need. The instructions do not address this. Can I assume that I will need both the RED and BLACK spacers?

asked by: Steven S

0

Expert Reply:

Hey Steven, I spoke with Air Lift and they suggest using both spacers that come with the Air Lift 1000 Air Helper Springs for Coil Springs # AL60829.

If you need anything else, please feel free to drop a comment and let me know!

expert reply by: Bryce D

0

Lazer S.

10/27/2025

Hey Steven, how did things go with using both spacers on your Wrangler’s Air Lift 1000 springs? Your update could make it easier for the next person setting up the same kit.

Answer 1

Yes, the Air Lift 1000 kit part #AL60829 is a fit for your 2018 Jeep Wrangler Rubicon. As long as you use the included spacers it will be at the correct height for your vehicle. There's no need for any additional spacers.

view full answer...

Answer 2

Yes, the Air Lift 1000 Air Helper Springs #AL60829 will work on your 2018 Jeep JL Wrangler with a 2.5" lift. The kit will come with a few smaller spacers. Depending on what kind of lift kit you have, an additional 2" spacer may be needed.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

How Many Spacers are Needed To Install the Air Lift 1000 Installed on a 2024 Jeep Wrangler Willy's

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching