How Long is Tekonsha Brake Controller Install Harness 3073-P

Question

Question:

I have a 2024 Jeep Gladiator but I am needing the length of this 3073-P please

asked by: Denis

0

Expert Reply:

Hey Denis, the length of the Tekonsha brake controller install harness part # 3073-P is 34 inches. Is that long enough?

expert reply by: Jameson C

0

Denis

2/20/2025

We think so. We ordered controller kit packaged with this custom harness from etrailer. We also ordered a 36 inch adapter harness to get us from vehicle controller port out of the kick panel area from extreme terrain. We're going for a removable dashtop mounted setup. Thanks for your response. We're still awaiting arrival of both units, should be here by Saturday - frozen solid in KC

Jameson C.

2/20/2025

@Denis Makes sense! Yeah it's freezing here in STL too. Sunday it should be a lot warmer...

Answer 1

Yes, the Dometic FreshJet 3 can typically be integrated with your existing Dometic 2 zone digital thermostat system on your 2019 Newmar Ventana, but it is not a direct plug and play replacement for your current Penguin unit. The FreshJet series is…

view full answer...

Answer 2

The Tekonsha Custom Wiring Adapter - Jeep #3073-P is the product you're looking for. This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 6

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 7

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 8

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 9

Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…

view full answer...

Answer 10

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 11

Thanks for the information Mike. The Redarc item #RED26CR includes the Tow-Pro Liberty Brake Controller and a custom plug in harness designed for your 2016 Chevy Silverado 1500 so long as your truck came with the factory tow package. You will not…

view full answer...

Answer 12

Hi Charles! I completely understand wanting to avoid wiring. It can be a real pain, The good news is that the Redarc Tow Pro Liberty Brake Controller with Custom Harness #RED74CR includes a wiring harness designed to connect to the factory brake…

view full answer...

How Long is Tekonsha Brake Controller Install Harness 3073-P

Continue Researching