Do you Carry a Hub with Inner and Outer Bearing L44649 and Grease Seal Inner Diameter 1.25"?
Updated 10/30/2025 | Published 02/01/2025
Products Featured in This Question
Question:
I have a Kendon trailer with straight spindle. It uses L44649 inner and outer but has a 1.25” ID seal. Is there a replacement hub assembly available for this?
asked by: Chris
Expert Reply:
Hello Chris,
Yes, we do have a hub that will work for you the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13315, or cast iron # CE13311. This hub has both inner and outer bearing L44649, and grease seal is 1.249" inner diameter and 1.983" outer diameter.
What kind of bikes are you hauling with your Kendon trailer?
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: 10~60 seal
- Search Results: bk1 150 bearing kit
- Search Results: trailer hub
- Shop: GREASE SEAL1.987"OD E-Z LUBE 15192TB
- Q&A: Recommended Replacement Hubs For BT-150 Trailer Idler Hubs
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Grease Seal
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR C
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: Trailer Axle with Idler Hubs Spec Review
- Video: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles Feature Review
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Q&A: Recommended Replacement Hub Assembly For 13" Trailer Wheels With A 5 on 4-1/2 Bolt Pattern
- Q&A: Replacement Hubs for Older Trailer with a 5 x 4-1/2 Lug Pattern
- Q&A: How to Determine Correct Hub For Harbor Freight Trailer For 13 Inch Wheel
- Q&A: Replacement Bearing Solution for DICO Hub 45263
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
Kate F.
10/30/2025
Hey Chris, how did the new CE Smith hub work out on your Kendon trailer? Did it match up well with your straight spindle and 1.25" seal? Your update could make it easier for others running the same setup.