Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Ed, welcome back! As long as the Big Truck Big RV Tongue Weight Scale #BTBRV004 is on a hard flat surface that does not flex it will work just fine. So you can use a spacer of some type to take up the extra space needed with this and it will work…
view full answer...Hey Liz. The cameras of the Furrion Vision S+ item #FR64AD will need to be wired directly to a constant 12v power source, like your Grand Design's batteries, to use them in the security mode. With the infrared lights on each camera will pull less…
view full answer...Hey Tony, great question, and you are definitely not alone, this is one of the most confusing parts of towing. The weight of your weight distribution hitch, including the shank and ball mount that slide into the receiver, counts against your truck’s…
view full answer...Hi Alex; the gauge on the Big Truck Big RV Tongue Weight Scale for Trailers #BTBRV004 has a +/- 5% full scale accuracy and displays weight in 20-lb increments up to 1,000 lbs. We also have it available with a SnapPad #BTBRV99FR. If you want something…
view full answer...Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…
view full answer...Since the part #PD4655V has come out and has ability to switch between lithium and lead acid batteries the part PD4655LIV was discontinued. At one point there were separate parts for lithium and lead acid batteries but since the current one can do…
view full answer...To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
view full answer...Hey Joe, I don't know what other companies have been telling you but I spoke with Dennis (Progressive Dynamics Tech) and he stated they haven't updated the Progressive Dynamics Replacement Section #PD4655V since 2018 when they added the…
view full answer...Hey James, yes the Progressive Dynamics 4000 Series part #PD4060K would be correct to replace what you have now and does have a Lithium battery charge profile. You could definitely install this by yourself.
view full answer...You have the Lippert Waste Master Camlock Connector on your 2018 Forest River Forester so for a single hose setup you need the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle #LC359724 to dump your tanks. This comes with…
view full answer...Hey Michael, this is a great question but you can use a tongue weight scale like the B and W part #BW34KR with a lighter tongue weight like what you have (relative to it's 4k capacity) and it will still work great. We had the chance to demo this…
view full answer...You are correct. When you set up the brake controller for the first time, you set the power to 6 with no boost, drive the vehicle and trailer on a flat surface at 25 mph, then fully apply the manual override. Adjust the power as needed to reach a…
view full answer...