Do TorkLift ApexAnchors Truck Camper Tie-Downs Require Specific Turnbuckles

Question

Question:

Howdy, Can I use standard or universal turnbuckles or do I need specific ones? Thanks

asked by: Jimmy

0

Expert Reply:

Hey Jimmy! The TorkLift ApexAnchors Truck Camper Tie-Downs # TL76SV do require specific turnbuckles. What you need are the TorkLift FastGun Apex Truck Camper Turnbuckles # TL88SV. This is just the front set of tie-downs so for the rear you need the # TL86SV or we have the pair together under # TL57QV.

If you have any additional questions don't hesitate to reach out in the comments below.

expert reply by: Robin H

0

ApexAnchors With FastGun Apex Turnbuckles
(click to enlarge)

Robin H.

11/3/2025

Hey Jimmy, how did things go with the TorkLift FastGun Apex turnbuckles for your tie-downs? Your update could make it easier for the next person setting up their truck camper.

Answer 1

Hey Ash, thanks for reaching out. That’s a solid build you’re putting together. For a Northern Lite 10-2 on a CM flatbed with a Ram 5500, you’re going to want the short TorkLift FastGuns #TLS9520. On flatbed setups like yours, the tie-down points are…

view full answer...

Answer 2

Yes, the Camper Hold Down Zinc Coated Finish #HSBP would work just fine on your 2014 Ford F-150. The only F-150s that Brophy says these won't fit are the 2004-2008 models. I attached a picture that shows what they will look like installed. For…

view full answer...

Answer 3

Yes, the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks #Y01155 will indeed work with the TS Rails for TruXedo Elevate Rack System #TH75FR and TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX571801 on your 2017…

view full answer...

Answer 4

Yes. The TS (T-Slot) Rails for Truck Hero Elevate Rack System are compatible with the Truxedo LoPro and the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover part #Y01151-5755.

view full answer...

Answer 5

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 6

The Yakima StageTwo Bike Rack #Y47VR won't secure properly to the adapter you're talking about. It's a great rack and I love the anti-rattle system, but the anti-rattle is built to essentially brace itself inside the receiver and then…

view full answer...

Answer 7

The available backup camera systems all require the use of a separate display. Although the systems in vehicles like your 2021 Ford F-150 are fairly advanced and allow you to download apps or view your vehicle backup camera, there is no way to…

view full answer...

Answer 8

I have a much better solution for you than the part #EM09085 as a camper tie down. The Brophy Camper Tie Downs, part #TDSF, you have referenced are a universal application. The hardware to mount the tie downs to the vehicle are included. These tie…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Do TorkLift ApexAnchors Truck Camper Tie-Downs Require Specific Turnbuckles

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching