Recommended In-Bed Camper Tie-Downs for a 2022 Toyota Tacoma

Question

Question:

Hey there, I have a newer 2022 Toyota Tacoma. I am looking at buying a new truck bed camper. I think most of the new ones need inside the bed mounts instead of the outside bracket style. Can you help me out here?

asked by: Michael

0

Expert Reply:

I would be happy to and congrats on your new truck! The best are going to be the TorkLift ApexAnchors Truck Camper Tie-Downs item # TL37QV. These are brand new and mount inside the bed of your Tacoma. They do not affect your ground clearance and provide an overhaul better appearance and more secure attachment points.

Please note that you will be required to drill four holes in your Tacoma's bed. What kind of in-bed camper are you looking at?

expert reply by: Jerred H

0

Jerred H.

11/3/2025

Hey, how did things go with the TorkLift ApexAnchors tie-downs on your Tacoma? Did the in-bed mounting style work well with the camper you chose? Your feedback could help others deciding between inside and outside mount options.

Answer 1

Hey Bill, the Torklift ApexAnchors Tie Downs part #TL37QV that fit your 2019 Toyota Tacoma install by attaching to the frame of your truck through the bed. So you'll need to drill a hole in your truck bed and attach the tie downs to the frame…

view full answer...

Answer 2

Yes; the best option - so long as your 2007 Tacoma has factory leaf springs and a lower overload spring - is the TorkLift StableLoad Suspension Upgrade #TLA7311S. These are compatible with lowered trucks, and work by bolting onto the ends of each…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Recommended In-Bed Camper Tie-Downs for a 2022 Toyota Tacoma

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching