Is There a Hitch for 2025 Subaru Outback

Question

Question:

Can you tell me if there is a hitch for my 2025 Subaru Outback? Thanks!

asked by: Josh

0

Expert Reply:

Hey Josh! We certainly do have a hitch for your 2025 Subaru Outback. The best one is our own etrailer Hitch # e25TR. This is a Class III hitch with a bolt-on installation. It has a concealed cross tube so you won't lose clearance and only the receiver is visible underneath. It also comes with a unique matte black finish which looks great with OEM trim and helps hide dirt/scratches.

Do you plan on towing? If so, you will also need the Tekonsh # 118467. This plugs into the connection point in your cargo area so you have a 4-way to power your lights. For a ball mount, check out the etrailer Ball Mount # e67DR.

If you need anything else don't hesitate to reach out in the comments below.

expert reply by: Robin H

0

etrailer Hitch on 2025 Outback
(click to enlarge)

Robin H.

11/3/2025

Hey Josh, how did the hitch for your 2025 Outback work out? Did the concealed design and matte finish look as clean as you hoped? Your feedback could help others choosing a similar setup.

Answer 1

Hello Ian, thanks for reaching out. Yes, the Draw-Tite #DT73RR is the correct fit for the 2025 Subaru Outback Wilderness. The picture below shows an example of what this hitch will look like installed on the Wilderness model. Feel free to reach out…

view full answer...

Answer 2

Yes, the Thule Tepui Explorer Kukenam 3 Rooftop Tent, #TH8001KSK05 is compatible with your 2022 Subaru Outback Wilderness Edition; it weighs 131 lbs. From specs available to me from an online Owners Manual for the 2022 Subaru Outback Wilderness…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

Hi Jeffrey, For a hitch for the 2026 Subaru Outback Wilderness that installs behind the bumper, I recommend the etrailer Class III Trailer Hitch Receiver part #e25TR. The cross tube is totally hidden behind the bumper, and only the hitch receiver…

view full answer...

Answer 11

Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Is There a Hitch for 2025 Subaru Outback

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching