Is Draw-Tite DT73RR Compatible With 2025 Subaru Outback Wilderness?

Question

Question:

Is this compatible on a 2025 Subaru Outback Wilderness?

asked by: Ian

0

Expert Reply:

Hello Ian, thanks for reaching out. Yes, the Draw-Tite # DT73RR is the correct fit for the 2025 Subaru Outback Wilderness. The picture below shows an example of what this hitch will look like installed on the Wilderness model.

Feel free to reach out and reply below if there is anything else I can do.

expert reply by: Jesse M

0

Draw-Tite DT73RR On Subaru Outback Wilderness
(click to enlarge)

Jesse M.

10/30/2025

Hey Ian, how did the Draw-Tite hitch work out on your Outback Wilderness? It’d be great to hear how the fit and look matched your expectations. Your update could make it easier for others with the same vehicle.

Reply

Ian

10/30/2025

Super easy to install. If you have some basic tools and skills, you can do this. I've purchased and installed 3 hitch receivers from etrailer, and this one was the easiest/fastest. Perfect fit for 2025 Outback Wilderness.

Reply

Jesse M.

10/31/2025

@Ian That’s awesome to hear, Ian! Glad the install went smoothly and that it was such a good fit on your Outback Wilderness. Sounds like you’ve become a bit of a pro with these installs! Thanks for sharing your experience!

Reply

Answer 1

Hello Mark, thanks for reaching out. Both the hitches you mentioned, the Draw-Tite #DT73RR and the Blue Ox #BLU92UR are a confirmed fit for the 2024 Subaru Outback. Both hitches also use the same size spacer and may require enlargement of the access…

view full answer...

Answer 2

Hey Brian! I'll start out by confirming that both the Draw-Tite item #DT94YR and our etrailer item #e25TR hitches fit the 2024 Subaru Outback Wilderness. The hitch pin hole sits 2" back from the edge of the bumper on the Draw-Tite item…

view full answer...

Answer 3

Hey Richard, thanks for getting in touch. I looked up this Subaru L101SAN000 and it appears this is what I call a "bumper beam" hitch. To install the hitch you remove the bumper and the factory impact structure underneath. The hitch then…

view full answer...

Answer 4

Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…

view full answer...

Answer 5

We actually have a few different hitch styles that fit your 2022 Subaru Outback Wagon and they come from Draw-Tite. If you go with the hitch #DT94YR then you'll have a cleaner looking install when you're done, but you will need to remove the…

view full answer...

Answer 6

Yes! If you check out the photos below, you can see the Draw-Tite Hitch #DT94YR installed on a 2022 Subaru Outback Wagon.

view full answer...

Answer 7

The Curt #C67JR and the etrailer #e25TR seem very similar because they have the exact same design and specs. In fact, the only real difference between them is the powder coat finish. The Curt has a glossy finish while the etrailer hitch uses a matte…

view full answer...

Answer 8

Yes, it does! The etrailer Hitch item #e25TR has been confirmed to fit the 2024 Subaru Outback Wilderness. This hitch is custom fit and bolts to your Subaru with included hardware. The etrailer Hitch item #e25TR is a class III hitch with a 2"…

view full answer...

Answer 9

Hey there Jeff; we do have a hitch and wiring for your 2025 Subaru Outback. For the hitch I recommend the etrailer #e25TR. The hitch has a concealed cross tube so only the receiver will be visible at the rear of the vehicle for a nice, clean look. It…

view full answer...

Answer 10

Hey Joe, yes the Draw-Tite Max-Frame Trailer Hitch Receiver #DT73RR will work great with your 2025 Subaru Outback. This hitch has a nice 4,500 lb capacity, a 675 lb tongue weight capacity, and has an easy bolt on install using the included hardware.…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Basically, in any state in the union, if the rear license plate or lights are obscured in any way, a police officer can pull you over, regardless of the specific verbiage of the laws. Beyond that it is just a good idea to add lights for safey. For…

view full answer...

Is Draw-Tite DT73RR Compatible With 2025 Subaru Outback Wilderness?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching