Is Curt 5th Wheel Install Kit C16420-104 Compatible With Blue Ox 20K Super Ride 5th Wheel Hitch?

Question

Question:

Will this work with a blue ox 20k super ride 5th wheel hitch

asked by: Will A

0

Blue Ox 20K Super Ride 5th Wheel Hitch
(click to enlarge)

Expert Reply:

Hello Will, thanks for getting in touch. Yes, the Curt Custom Fifth Wheel Installation Kit # C16420-104 is indeed compatible with the Blue Ox 20K Super Ride 5th Wheel Hitch. The Super Ride hitch is made for industry standard 5th wheel rails, and that is exactly what comes with the Curt kit. The Curt # C16420-104 will fit the following vehicles:

2006-2008 Dodge Ram Pickup 1500 - 6-1/2 ' Bed - Mega Cab
2003-2012 Dodge Ram Pickup 2500 - 6-1/2 ' Bed
2003-2012 Dodge Ram Pickup 2500 - 8 ' Bed
2003-2012 Dodge Ram Pickup 3500 - 6-1/2 ' Bed
2003-2012 Dodge Ram Pickup 3500 - 8 ' Bed
2010-2012 Ram 2500 6-1/2 ' Bed
2010-2012 Ram 2500 8 ' Bed
2010-2012 Ram 3500 6-1/2 ' Bed
2010-2012 Ram 3500 8 ' Bed

Let me know what truck you have in the comments below and I can confirm fitment for you.

expert reply by: Jesse M

0

Jesse M.

11/3/2025

Hey Will, did the Curt fifth wheel installation kit end up working well with your Blue Ox Super Ride hitch? Knowing how the fit turned out could help others setting up the same combo.

Answer 1

Since your 2014 Ram 2500 long bed has the factory 5th wheel prep package you will need to use adapter #RP30154. This adapter will fit in the factory holes in the truck and will accept 5th wheel trailer hitches that fit in industry standard above the…

view full answer...

Answer 2

Since your Pullrite Superglide 2700 is one of the ISR models it will fit on the B&W installation kit #BWRVK2600 which does feature industry standard rails. And the rail kit is a fit for your 2012 Ram 2500 Mega Cab. So you will be good to go! I…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Is Curt 5th Wheel Install Kit C16420-104 Compatible With Blue Ox 20K Super Ride 5th Wheel Hitch?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching