Can The etrailer Anti-Rattle Hitch Collar For 2" Hitches #E38FV Be Used With A Hitch Extender?

Published 01/20/2025

Products Featured in This Question

etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers

(702)

$49.04

Curt Hitch Extender for 2" Hitch Receivers - 8" Long

(671)

$60.95

Question:

Can I use this anti-rattle clamp with a hitch extender?

asked by: Luke

Expert Reply:

Yes, Luke, you should be able to use the etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers - Pre-Order # E38FV in combination with a hitch extender such as Curt Hitch Extender for 2" Hitch Receivers - 8" Long # C76DR. I say "should" because you'll need to make sure the extender's 2" tube protrudes at least 1/2" outside of the vehicles receiver lip. It is rare for fitment to be an issue, but I'll elaborate on how to verify fitment.

As you can see in the photo, the # C76DR has 3" from the hitch pin hole to the section where the tube becomes larger, so you'll need to measure the distance from your vehicle receiver's hitch pin hole to the outside of the receiver to make sure you have at least 3-1/2" to allow the anti-rattle collar's gate to close on the tube properly.

Let me know what you think of this and feel free to check back in with other questions or concerns; don't be a stranger!

expert reply by: Andrew N