Can Yakima EXO Swing Away Storage System part # Y44ZR Work on Entegra Ethos 20D

Question

Question:

Will the Yakima swing away 2 tier storage work with a Class B Entegra Ethos 20D? It is a Dodge Ram ProMaster 3500 chassis.

asked by: Patty C

0

Expert Reply:

Yes, the Yakima EXO Swing Away Storage System part # Y44ZR will work on a Dodge Ram Promaster chassis like what your Entegra Ehos 20D is built on.

expert reply by: Jameson C

0

Answer 1

Hey Jay! To clear maintain access to the rear doors on your ProMaster you will need a swing away cargo carrier. I have two options for you. The first is to use a traditional cargo carrier like #C18152 (or #C63ZJ with cage) and an adapter like the…

view full answer...

Answer 2

For a 2-inch hitch the longest hitch extensions we offer are the 60-inch #TLE1560 and 48-inch #TLE1548, both from TorkLift. However, these only work along with a TorkLift brand SuperHitch dual-receiver type hitch that has the strength and included…

view full answer...

Answer 3

Great question! From the bottom of the GearWarrior Basket to the TopShelf arms measures about 18" for the Yakima EXO Systems like part #Y44ZR that you referenced. I confirmed this with my contact at Yakima and I've attached a photo to…

view full answer...

Answer 4

To switch out the lock cores on your Yakima EXO Swing Away Storage System #Y44ZR you'll need the lock core and key you want to switch out, as well as the Replacement Control Key for Yakima Same Key System #Y8007835. For example, if you wanted an…

view full answer...

Answer 5

Hello Martin, so I went ahead and double checked with Yakima, and the 18" measurement you saw is the actual clearance. This is measured from the top GearWarrior platform, as in the surface your gear would sit on, to the bottom of the TopShelf…

view full answer...

Answer 6

Yes, the Yakima EXO System with Cargo Carrier and Enclosed Cargo Carrier - 2" Hitches #Y44ZR can swing out when fully loaded, just make sure you do not exceed the weight capacity. When the enclosed carrier is on the top shelf then the weight…

view full answer...

Answer 7

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 8

Hi Robert, Yes, using a hitch extender will typically reduce the capacity of the trailer hitch by at least 50% because you're now leveraging the weight further out. The only time you won't see this is with a TorkLift SuperHitch and SuperTruss…

view full answer...

Answer 9

Most manufacturers simply state that using a hitch extender will reduce the tongue weigh of your hitch's capacity by 50%. There is a formula you can use because the standard ball mount about 11 inches, so you will determine the length difference…

view full answer...

Answer 10

Yes, Luke, you should be able to use the etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers - Pre-Order #E38FV in combination with a hitch extender such as Curt Hitch Extender for 2" Hitch Receivers - 8" Long #C76DR. I say…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Can Yakima EXO Swing Away Storage System part # Y44ZR Work on Entegra Ethos 20D

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching