Can The Tekonsha Prodigy P3 Brake Controller Be Used In A 2013 And 2019 Chevy Silverado

Question

Question:

Will the 90195 work for s as 2013 Silverado and a 2019 Silverado LD

asked by: Bennett C

0

Expert Reply:

Hey Bennett,

The Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is a universal fit so the only thing you'll need to do is figure out what wire harness you need to install it. For the 2013 there will be a wire harness taped up behind the dash that you'll splice the included wire harness to.

For the 2019 you could use the included splice in harness but your brake light switch isn't accessible so you'll need a stop light switch # RM-751000 to get the signal for the brake signal to the brake controller. It'd be much easier to just use the plug in harness # 3016 instead.

If you're wanting to purchase the P3 and use it in both vehicles then you'll want to pick up the # TK57HR to get the plug-in and splice in harnesses and a second mounting bracket # TK5906. You can easily unplug the P3 and move it back and forth between the vehicles.

expert reply by: Kevin C

0

Bennett C.

12/27/2024

Is their a plug in harness for the 2013 Silverado to use with the 90195?

Kevin C.

12/27/2024

@BennettC No, 2013 models will have a factory wiring harness that's taped up behind the dash. The attached video below will help you find this bundle.

Answer 1

The factory brake controller port on your 2019 Chevy Silverado 1500 LD is in your vehicle's junction box underneath the dash, to the left of the steering column. The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part #3064-P is…

view full answer...

Answer 2

The Tekonsha Plug-In Wiring Adapter #3016 is the correct adapter to connect to the factory brake controller on your 2019 Chevrolet Silverado 1500 LD. This connector only has 4 pins versus the 14 pin harness #3064-P that fits the redesigned 2019…

view full answer...

Answer 3

The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…

view full answer...

Answer 4

Yes, you can install a brake controller in your 2022 Chevy Silverado 1500 with tow package using the install harness part #3064-P that you referenced. This would be what you'd need to install our very popular and great performing Prodigy P3 part…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 11

Hi Jeff, welcome back and sorry to hear that gave you so much trouble. The Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR will work on your Silverado. This plugs in-line at the back of your 7-way at the rear of the truck. You can either…

view full answer...

Answer 12

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Can The Tekonsha Prodigy P3 Brake Controller Be Used In A 2013 And 2019 Chevy Silverado

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching