Replacement Grille Guard Rubber Strips For A 2018 Chevy Silverado 1500

Question

Question:

I need the replacement rubber trim for my 2018 Chevy C1500 LZ. I just bought the truck and the brush guard does not appear to have a brand name. The size of the upright on the brush guard is 1 1/4 x 36. Could you tell me which trim set I need to buy please? Many thanks,

asked by: Jim K

0

Expert Reply:

Hey Jim,

The Replacement Rubber Strips for Aries Automotive Grille Guards # AA2072905 has a 1-1/4" channel and is 80" in length so it'd be a good replacement option for your grille guard even though we don't know the brand name.

expert reply by: Kevin C

0

Jameson C.

11/17/2025

Hey Jim, how did the replacement rubber strips for your grille guard work out on your Chevy? Your results could really help others who have guards without a brand name.

Jim K.

11/17/2025

@JamesonC I haven't put them on yet. They're so stiff, I decided to leave them out in the sun for a few days to get flexible enough to put them on. Well... a few days has turned into a few months. I'm thinking that I'll have to have some help to install them. Or perhaps there's a trick to getting them to slide on. So far though, I'm pulling up a blank.

Answer 1

Hello Rick, For the Replacement Rubber Strips for Aries Automotive Grille Guards #AA2072905 the inside channel is 1 1/4" and they are 80" long. I am showing that it will fit: 1-1/4": Perfect snug fit, as intended, 1-5/16"…

view full answer...

Answer 2

The Replacement Rubber Strip for Aries Automotive Grille Guards #AA2072905 will work for your 2015 Chevy Silverado as long as it has an Aries grille guard. If you have a different brand you would need to look at that specific brand and model to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Replacement Grille Guard Rubber Strips For A 2018 Chevy Silverado 1500

Products Featured in This Question

Continue Researching