What are the Dimensions of the Replacement Rubber Strips for Aries Automotive Grille Guards?

Question

Question:

What. Is the inside width largest width rail will this product fit over, and what is the overall length?

asked by: Rick S

0

Expert Reply:

Hello Rick,

For the Replacement Rubber Strips for Aries Automotive Grille Guards # AA2072905 the inside channel is 1 1/4" and they are 80" long. I am showing that it will fit: 1-1/4": Perfect snug fit, as intended, 1-5/16" (1.3125"): Tight but doable with warming/soapy water.

What are you looking to use these for?

expert reply by: Kate F

0

Channel Dimension on Replacement Rubber Strips for Aries Automotive Grille Guards
(click to enlarge)

Rick S.

4/16/2025

I’m looking to add bumper strips to a different brand grill/bumper. My bumper rail is 1 1/2 inch wide across the flat so this product is to narrow for my application. If you have a similar product that will fit my width requirements, I’d buy it!

Kate F.

4/21/2025

@RickS We do have the Replacement Rubber Strips for Westin HDX Grille Guard - Qty 2 # 57-0001, I just went out to warehouse and it is 2" on the inside channel. It is the widest one we have. Do you happen to know the brand of you bumper rail/grille guard?

Rick S.

4/21/2025

@KateF Kate. the bumper/Grill Guard is made by a company called "Throttle Down Kustums" (yes that's the spelling) Made in Montana. The vertical rails are approximately 3+ feet long and are 1 1/2" wide "T" shaped. If you have a product that is that width (1 1/2") I'll buy it for both of my trucks. Thanks for working with me! Customer service isn't what It used to be......You folks rock!

Kate F.

4/24/2025

@RickS I do not have good news, I reached out to our manufacturers and they do not have the size you are looking for, so I am not able to get anything added to our site. My apologies.

Answer 1

The Replacement Rubber Strip for Aries Automotive Grille Guards #AA2072905 will work for your 2015 Chevy Silverado as long as it has an Aries grille guard. If you have a different brand you would need to look at that specific brand and model to…

view full answer...

Answer 2

Hey Jim, The Replacement Rubber Strips for Aries Automotive Grille Guards #AA2072905 has a 1-1/4" channel and is 80" in length so it'd be a good replacement option for your grille guard even though we don't know the brand name.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

What are the Dimensions of the Replacement Rubber Strips for Aries Automotive Grille Guards?

Product Page this Question was Asked From

Continue Researching