Recommended 3,500 lbs Axle w/ a 95" Hub Face
Updated 11/17/2025 | Published 12/12/2024
Products Featured in This Question
Question:
i got a customer looking for an axle 3500lbs with brakes 95 inches from backing plate and 80 inches on center of the spring pads 5 on 5 pattern on the lugs
asked by: Scott A
Expert Reply:
Hey Scott! I've got an axle I think will work for you but I am concerned about your measurement. Our axle's are categorized by hub-face-to-hub-face and spring-center-to-spring-center measurements as shown in the diagram below. We do not go by the backing plate distance.
The 3,500 lbs axle I found is the Dexter Trailer Axle Beam with E-Z Lube Spindles item # 7359765. It has 95" hub-face-to-hub-face and 80" spring-center-to-spring-center measurements. For compatible 5 on 5 hubs you'll want two of the Easy Grease Trailer Hub and Drum Assembly item # AKHD-550-35-EZ-K.
(click to enlarge)
Product Page this Question was Asked From
Replacement Topwind Handle w/ Claw Knob for etrailer and Ram Square, Direct Weld Jacks - 3K - 7K
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Topwind
- etrailer
more information >
Continue Researching
- Shop: Lionshead Steel Modular Trailer Wheel - 15" x 6" - 6 on 5-1/2 - Black
- Shop: Dexstar Steel Spoke Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Lift - 2,000 lbs - Black
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black
- Search Results: l track tie down
- Shop: Tow-Rax Low-Profile Floor Track for Tie-Down Anchors - Aluminum - 6' Long - Machined - Qty 1
- Search Results: valve stem
- Search Results: single axle aluminum fender
- Search Results: l track
- Search Results: clevis
- Search Results: trailer axles
- Search Results: tarp
- Shop: Provider ST205/75R15 Radial Trailer Tire - Load Range D
- Shop: Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 13" to 15" Wheels - Qty 1
- Q&A: Are Heater Pads Self-regulating or is a Thermostat Needed?
- Q&A: Length of Replacement Handle with Claw Knob for Square Jacks
- Q&A: What is Diameter of Lock Core Side of B and W Coupler Lock part # BW23FR
- Q&A: What Jacks Do the Replacement Handle for Ram Jacks Fit
- Q&A: 2 inch Outer Diameter A-Frame Trailer Jack Recommendation
- Q&A: Replacement Hub for Tapered Spindle Bearings 09078 and 15118
- Q&A: Grease Seal Recommendation for Dimensions 1.375 ID and 1.983 OD
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: What Do I Need To Tow A Trailer?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Is It Illegal to Leave My Hitch on My Truck?
Jerred H.
11/17/2025
Hey Scott, did the Dexter 3,500-lb axle and 5 on 5 hub assemblies end up matching your trailer’s measurements once you rechecked them? Knowing how that fit worked out could really help others trying to size their axles the same way.