Availability of Trailer Hitch for 2007 Ford Focus Wagon

Question

Question:

Hello, There are hitches for a 2007 Ford Focus sedan and hatchback listed, but not for the wagon. Is there a hitch that fits a 2007 Ford Focus wagon? Thank you.

asked by: Tom M

0

Expert Reply:

Hi Tom; what you need is the Curt 11296. Curt actually discontinued this hitch earlier this year and we no longer have it in stock but, you may still be able to find it elsewhere. If you aren't able to find one, the only option is to take the # E17 to a local fabricator and have them fashion a custom hitch for your vehicle.

expert reply by: Robin H

0

Robin H.

11/17/2025

Hey Tom, were you able to track down the Curt hitch for your Focus wagon or go the custom route with a fabricator? Knowing what worked could help someone else trying to fit a hitch on the same model.

Tom M.

11/17/2025

@RobinH Hello Robin. I did eventually find a Curt 11296 model in a small shop in Washington. It's been working great. I even towed a U-haul trailer with 24 boxes of books and tools from Biloxi to Portland with it in January. Thanks.

Answer 1

Aside from the weight capacity of the jacks and their speed, they also have different mounting bracket locations. If you don't mind potentially having someone do some cutting and welding on your trailer then either one will work great for you. If…

view full answer...

Answer 2

Most likely you need to go with the Reese Landing Gear Set #RP500708 because it has the typical inside to inside and outside to outside spacing of 15-1/2" and 17-1/2" respectively. This is the most common weld stop measurements which is why…

view full answer...

Answer 3

While I don't know exactly what landing gear you have on your 2011 Keystone Raptor 3812 Toy Hauler, I can say that you should be able to replace them with the Landing Gear Set w/ Handle #RVLG-8HDL as this landing gear uses the standard weld mount…

view full answer...

Answer 4

Hey David! We have exactly what you need for your 2024 Kia Telluride. I have listed the parts below: Class III Trailer Hitch - Curt item #C13420 Custom Fit 4-Way Wiring Harness - Curt item #C93FV - without LEDs or Curt item #C29ZV if your Telluride…

view full answer...

Answer 5

Hello Mark, thanks for reaching out. The #C29ZV is the Curt part 56501. If you are looking for the Curt 56490, our part number for that is #C93FV. This is a T-Connector for a 2023 - 2024 Kia Telluride LX or S models without LED tail lights. The…

view full answer...

Answer 6

No, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK74CR will unfortunately not work with your 2023 Kia Telluride with LED lights. Your best bet would be to use a universal wiring harness #C59236 which will work with…

view full answer...

Answer 7

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 8

I recommend the Tekonsha Prodigy P3 Trailer Brake Controller #90195 for your 2017 Coachmen Sportscoach 407FW. This will connect to the factory wiring port on the left side of the steering column with a Tekonsha Plug-In Wiring Adapter #3027-P. I have…

view full answer...

Answer 9

Because of the length of your motorhome and the interior partitions, the Curt #C51180 Echo Wireless Brake Controller wouldn't work on your Class A motorhome. You'll need to use a standard brake controller. Your motorhome has the 7-way trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Availability of Trailer Hitch for 2007 Ford Focus Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching