Can 2012 Nissan Leaf EcoHitch be Removed and Reinstalled on Another 2012 Nissan Leaf

Question

Question:

Can I remove the eco hitch on my current 2012 Nissan Leaf and mount it onto another 2012 Leaf? Will I need new hardware?

asked by: Harry

0

Expert Reply:

Hey Harry,

You can definitely remove and reinstall the EcoHitch Hidden Trailer Hitch Receiver # 306-X7184 on a 2012 Nissan Leaf, you'll just need the Replacement Hardware Kit # RHK. Once you go to the product page just input the hitch part number and we'll send out your new hardware!

Hitch hardware is only designed to be installed once, so while the hitch can be reinstalled, the hardware can't.

expert reply by: Jon G

0

Jon G.

11/17/2025

Hey Harry, how did things go moving your EcoHitch to the other Leaf with the new hardware kit? Knowing how the reinstall went could help others planning the same swap.

Harry

11/17/2025

@JonG Hi, I didn't end up needing to do a reinstall because I didn't buy the other leaf. Thanks for checking. Harry

Kate F.

11/18/2025

@Harry Thanks for the response Harry =)

Answer 1

Hey Eric, so the install the of the Curt hitch part #C11396 is pretty similar to the EcoHitch part #306-X7184 but the brackets are different. The passenger side bracket is totally different and the driver side has an additional bolt hole over the…

view full answer...

Answer 2

You need the EcoHitch Hidden Trailer Hitch Receiver #306-X7221 for your 2013 Nissan Leaf. The Receiver #306-X7184 you found fit the 2011-2012 model years while the receivers appear very similar you can see the mounting bracket which bolts to the…

view full answer...

Answer 3

The EcoHitch part #306-X7184 that fits your 2011 Nissan Leaf weighs a total of 58 lbs.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Many light trucks that already have a 7-way trailer connector installed from the factory will have some kind of wiring up under the dash of the vehicle to wire or plug into the brake controllers wiring harness. However on the 2000 Dodge full size…

view full answer...

Answer 8

In order to mount a fifth wheel hitch to the factory rail system on your 2016 Nissan Titan XD, you will first need to obtain the factory adapter directly from Nissan. This will mount to the pucks in your truck bed to provide industry standard rails…

view full answer...

Answer 9

While there is no need for a slider hitch for a long bed truck, there is no reason you couldn't use one in a long bed truck. Normally when we get this question the slider hitch is a manual slider and we recommend just leaving the slider in the…

view full answer...

Answer 10

The difference between the #RM-4700 and the #RM-4750 is being able to use them with your base plates. If you have the crossbar on your base plates you will need part #RM-4700. The RM-4750 is not compatible with other style base plates. Since you said…

view full answer...

Can 2012 Nissan Leaf EcoHitch be Removed and Reinstalled on Another 2012 Nissan Leaf

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching