Does the Weigh Safe 180 Hitch 2-Ball Mount for 2.5" Hitch WS74MR Fit a 2-1/2" Receiver?

Question

Question:

Does this fit a 2.5” receiver ? It comes with a 2.5” shank correct?

asked by: Matthew

0

Expert Reply:

Yes, it does Matthew! The Weigh Safe 180 Hitch 2-Ball Mount for 2.5" Hitch item # WS74MR is designed for and will only fit a 2-1/2" receiver.

expert reply by: Jerred H

0

Jerred H.

11/17/2025

Hey Matthew, how did the fit with the Weigh Safe 180 Hitch work out on your 2.5" receiver? Knowing how it performed could help others looking for the same setup.

Answer 1

Although it is not sold as a set like the #e68ZR, we do have these locks available with a keyed alike option. You will need the etrailer Adjustable Trailer Coupler Latch Lock #e98883 and the etrailer Hitch Receiver Lock for 2" and 2-1/2"…

view full answer...

Answer 2

The Trailer Hub and Drum Assembly part #AKHD-545-35-EZ-K would be an excellent replacement for a Tru-Ryde Hub/Drum RVD-H-545. Then for new brakes, I recommend the Hydraulic Trailer Brake Kit part #AKFBBRK-35.

view full answer...

Answer 3

Tony, it sounds like you're looking for something like the etrailer Soft Tonneau Cover #e52DR for a low profile or #TX279101 for a standard profile. These tonneau covers sit on top of the bed rails, are a soft roll-up style, and sit 1 1/4" (…

view full answer...

Answer 4

While locking hitch pins aren't rated for capacity like a hitch, the strongest is the InfiniteRule hitch pin, which has a 42,000 lb shear strength. They are available for 2", 2-1/2" and 3" hitches: - 2" Hitch: InfiniteRule…

view full answer...

Answer 5

Hi Kevin! Though Reese has been around for a long time and people swear by them, between Reese and B&W 5th wheel hitches, I will always recommend B&W. The B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw -…

view full answer...

Answer 6

Thanks for all the details Jason! To get a Blue Ox tow bar to fit with the shackles on your 2021 Jeep Wrangler Sport you'll need either the 7/8" #BX88357 or 1" #BX88358 Adapters, but just be sure to check with the manufacturer of your…

view full answer...

Answer 7

If the B and W Companion hitch is the #BWRVK3600 which fits the OEM rail kit of a Ram truck it can be used with a pivoting pin box like the Turning Point but if the hitch attaches to a gooseneck hitch via a center post then it can not be used with it…

view full answer...

Answer 8

I have a good solution but when using the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches part #ERT00108 there is not an option that doesn't attach to the ball mount. My thought for you to get the benefits of the Rock…

view full answer...

Answer 9

The heat shield part #RT76FR that you referenced was designed to prevent the type of damage you have on your Rock Tamers mud flap so this would be best solution. Other option is to have a turn down welded to your exhaust tip so that it is directed…

view full answer...

Answer 10

I suggest using heat shields #RT76FR with the rock tamers #ERT00108 unless you have an aftermarket tip on your exhaust that makes a complete 90 behind the tire.

view full answer...

Answer 11

Rock Tamers has a heat shield specifically for their mud flaps as the part #RT76FR which is the kit you'd want since this is the mud flap system you have. There's no reason the Access one you mentioned couldn't be used but the gap the…

view full answer...

Answer 12

Use a wrench to hold the base of the jack and it will extend once it has extended a little bit you will see a groove on the inner tube of the jack. You want to line that groove up with the indention on the front of the outer tube. Once aligned you…

view full answer...

Does the Weigh Safe 180 Hitch 2-Ball Mount for 2.5" Hitch WS74MR Fit a 2-1/2" Receiver?

Product Page this Question was Asked From

Continue Researching