B&W Turnover Gooseneck for 2015 Ford F-350 Cab and Chassis

Updated 11/27/2024 | Published 11/24/2024

Products Featured in This Question

B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs

(4456)

$599.00

Center Section for B&W Turnoverball Underbed Gooseneck Hitch - 30,000 lbs

(4454)

$329.00

B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs

(4454)

$249.00

Reese Low-Profile 5th Wheel Trailer Hitch - Dual Jaw - 30,000 lbs

(28)

$1431.90

Question:

Hello. I would like to purchase the following item for my truck. BandW Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs Part Number: BWGNRK1111 My truck info is below: VIN: 1FD8X3H65FEA72070 2015 Ford F-350 Super Duty KingRanch 4WD 8 Cylinders 6 6.2L I have attached a picture of my truck chassis that shows its dimensions. That’s the first picture attached here. Would Part Number: BWGNRK1111 fit on my truck chassis? Do I have to create additional holes on the truck chassis or the Part Number: BWGNRK1111 has enough holes that line up with holes that are created by Ford in my truck chassis? I purchased a used hitch from Facebook second picture attached to this message but it didn’t fit to my truck. Thanks for looking into this and looking forward to hearing from you.

asked by: Arash M

2015 Ford F350 Cab and Chassis
(click to enlarge)

B&W Turnover Gooseneck
(click to enlarge)

Expert Reply:

Hello Arash.

Thank you for all the information, it is most helpful. The VIN confirmed that it is a 2015 Ford F-350 Cab and Chassis.

For your 2015 Ford F-350 Cab and Chassis there is not a bolt on application. Your best bet would be to get the Center Section for B&W Turnoverball Underbed Gooseneck Hitch - 30,000 lbs # BWGNRC800, this would need to be fabricated to work. If you had a flatbed on the chassis you could use B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs # BWGNRK1500.

If you have part number on the B&W part you purchased, I am happy to let you know what it does fit if you want to try to resell it.

expert reply by: Kate F

Arash M.

11/25/2024

Thanks for your responses. What do you mean exactly that the Center Section for B&W Turnoverball Underbed Gooseneck Hitch - 30,000 lbs # BWGNRC800, “would need to be fabricated to work”? Please can you elaborate more? Thanks.

Kate F.

11/26/2024

@ArashM Since there isn't a custom bolt on application for the F-350 Cab and Chassis, you would need to get the # BWGNRC800 and then custom fit it on the frame of the F-350 which will require quite a bit of welding. I would find a local fabrication shop to do it if you are not an experienced welder.

Arash M.

11/26/2024

@KateF Thanks for your response. It sounds like a lot of work if I want to put a gooseneck hitch on this truck. What is the part number for the best Fifth wheel hitch that I can put on this truck? Forget gooseneck hitch.

Kate F.

11/27/2024

@ArashM Yes, definitely quite a bit of work. The 5th wheel option is going to take some fabricating as well, but not as much. The Reese # RP30054 can be installed on a cab and chassis without 5th wheel rails. You are still going to need to install a 1/2 inch thick steel plate under the bed for proper support as well. I have attached the instructions for the # RP30054 and a review video to check out.

Helpful Links

tv-demo-reese-fifth-wheel-rp30054.aspx

Arash M.

11/25/2024

I don’t have any bed on my truck as the picture shows, that was sent in my first message. Woukd dimension of the Center Section for B&W Turnoverball Underbed Gooseneck Hitch - 30,000 lbs # BWGNRC800 fit on my truck? I want to make sure it is the right choice before purchasing. Thanks.