TorkLift Tie-Downs For 2015 Chevy Silverado 3500 Crew Cab 8ft Bed Without Step

Question

Question:

hello I had a 2012 Silverado 2500 HD crew cab dual rear wheel factory hitch had installed torklift brackets front TLC2219 and rear TLC3212 also have Fast gun TLS9526-2-LK tie downs Have upgraded my truck to a 2015 3500HD dual rear wheel factory hitch no step will the torklift brackets work on this new vehicle? front TLC2219 rear 33212 fast guns TLS9526-2-LK I think it will but felt I will ask experts thanks for your reply

asked by: John F

0

Expert Reply:

Hello John.

Great question, and congrats on the upgrade to the 3500. For your new 2015 Chevy Silverado 3500 I am showing that the TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TLC2219 will transfer over just fine as long as the truck is a crew cab with 8 foot bed.

For the rear mount I am showing that the # TLC3212 will NOT work with the 2015, the last year they worked for was the 2014, so they must have modified the frame in 2015. For the correct rear tie downs you want TorkLift Camper Tie-Downs - Custom Frame Mount - Rear # TLC3217.

The TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Polished Stainless Steel - Qty 4 # TLS9526-2-LK should transfer over with no issues as they are the 4 long ones and will work great with the 2015 Chevy Silverado 3500.

expert reply by: Kate F

0

John

11/4/2024

Thank you for the quick reply! Glad I waited on install. lol Saved me the headache!

Answer 1

The TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLC3217 you referenced will not interfere with the MagnaFlow #MF17976 in stainless steel. The camper tie-down mounts to the frame directly and the exhaust will use the rubber hangers just…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 10

Hey Marc, When it comes to anti-sway bars the thicker the better they'll perform so you'll want measure the thickness of your current bars and swap them out accordingly. The thickest options we offer for your 2024 GMC Sierra 3500 are the…

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

Hey Craig, thanks for reaching out. Yes, they will! The TorkLift StableLoad Suspension Upgrade #TLA7200 will indeed work with the Timbren bump stops on your 2025 Chevy 3500HD. The StableLoads mount under the overload spring, while the bump stops…

view full answer...

TorkLift Tie-Downs For 2015 Chevy Silverado 3500 Crew Cab 8ft Bed Without Step

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching