Search: truck bed mat   >  

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The weight of the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs #TLC2204 is 21.4 lbs, while #TLC3206 weights 29.5 lbs. Other than #TLC3206 weighing 7.4 lbs more than #TLC2204; #TLC3206A is aluminum and #TLC3206 is black in color. Also,…

The part #TLF2012A weighs 27 lbs and the #TLF2012 weighs 31 lbs. The #TLF3004A weighs 35 lbs and the #TLF3004 weighs 28 lbs. I would not recommend using two hitch extenders with a bike rack. You might consider a front hitch to carry a bike rack.

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

How long a system can support off-road support depends on your battery (or batteries) as well as what your use will be. Running things like AC will drastically change the time you can be away from shore power without a fairly good size generator. For…

The 6-pole sockets that we carry can only handle up to 12 gauge wire so the only way to really swap away from Lance's proprietary connector would be to treat it like a standard camper and switch to a junction box and 7-way connector like parts…

Since the 7-way round pin plug is obsolete, your best bet would be to replace the connector on your camper with the common 7-way blade style connector. You'd remove the existing plug on your slide in camper, and replace it with #A7WCB. You could…

The outside diameter of the fitting of the #RE64FR drain tube is 7/8 of an inch. You can see a product description video for the drain tube by clicking the provided link.

When a camper is loaded on a pickup truck bed there will be a gap between the truck bed rails and the underside of the camper as you show in your photo. No worries there. For your camper tie-downs, it loos as though you have attached the rear ones…

Timbren likes to recommend 1 inch between the axle and the Timbren when the truck is unloaded. We have found that this works the best. This allows the suspension to feel when the vehicle is unloaded and still gives you support when needed when…