To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These frame-mounted tie-downs keep your camper secure by distributing its weight evenly across the truck’s frame. With the camper mounted lower and closer to the frame, handling stays steady even in strong crosswinds or on uneven roads. That means no shifting, swaying, or top-heavy feel—just a confident, comfortable ride wherever you go.
Each bracket bolts directly to pre-existing holes in the frame, so there’s little to no drilling and no need for extra modifications. The tight, custom fit keeps your truck’s structure intact and preserves ground clearance. It’s a solid install that feels like it was made for your setup from the start.
Made from heavy-duty steel and finished with a high-impact powder coat, these tie-downs are built to handle years of road use and exposure. The tough coating adds a layer of protection against rust and wear so they’ll keep performing trip after trip.
When you’re not hauling a camper, just remove the tie-down arms and the brackets stay tucked neatly under the truck—almost invisible from the side. You get full function when you need it and a clean look when you don’t.
Each arm includes two pin holes so you can extend it as needed for proper turnbuckle alignment. Two anchor holes on the attachment plate let you position the turnbuckles at the best angle to hold your camper steady from multiple directions. The result is a tight, balanced setup that keeps everything locked in place mile after mile.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at these Torklift rear camper tie downs. These tie downs provide the attachment points at the rear of your truck bed so that you can secure your truck camper's turn buckles. The front tie downs are gonna be required, but they are sold separately, but you will need all four so that you can have those tie down points at all four corners. Your turn buckles that secure your camper to the tie downs are also sold separately. You probably already have them for your camper, but if not, you will need to pick some up.
Now these are going to work with lots of different vehicles. They're gonna fit several different years, and package setups for the Chevrolet, Ford, GMC, Nissan, Ram, and Toyota, models that you see on the screen there. So because this does work with so many different options, it's hard for me to really pinpoint, fine tune that for you. So I would encourage you to use our vehicle fit guide here at etrailer.com so you can select your year, make, and model, and then we'll walk you through as how to identify and make sure that this component is gonna work for your vehicle. So be sure to use that vehicle fit guide, but this is going to have these frame mounted brackets that use pre-existing holes in your vehicle's frame.
So there's very little, if any drilling required. They do include very detailed instructions to make sure that you're getting them installed properly, as well as the installation hardware that you're gonna need. And because these are mounted to your truck's frame, there's gonna be very minimal loss of ground clearance, if any. So it is gonna sit nice and tight up against your frame, and securing to the truck's frame is also going to ensure more stability. So being down there on the base of your truck rather than up on your bed rails is going to help create a lower center of gravity, make it less top heavy.
So it's gonna be a lot more stable for you than if you we're to have it attached higher up. So it's gonna be less vulnerable to, say, strong winds and sway, and that sort of thing. One of the really nice things about this Torklift design is that unlike some of your other options where you have a bracket that's permanently mounted where it's gonna be visible, it kinda takes away from the look of your truck when you don't have your camper in there. These you can just remove the arms because these do sit against your frame. They're gonna be right there on the bottom of your truck so they're virtually invisible when you have the arms taken out.
So you won't be seeing them or they're not gonna take away from the look of your truck. But then when you're ready to put your camper in and just simply slide these in, and you'll be ready to go. So there are two different holes here on the arms to accommodate different widths of your camper. So if you have a wider camper, you can just slide it into that first hole there, and then use the included pin to secure those arms to your brackets. This whole setup is made here in the USA of a very durable steel construction so it is gonna hold up really well for you. It also has this black powder coat finish as you can see so it will resist rust and corrosion. This kit does come with a limited, or sorry, a lifetime warranty. So if you we're to have any issues with it, you're more than welcome to reach out to us here at etrailer.com. But overall, I think this is gonna be a great way to make sure that your camper is securely connected to your truck. Giving you a very easy way of getting these mounted, and having that ability to remove those arms, take away any unsightly brackets being installed when your truck is being used for other purposes. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Lazer S.
9/16/2025
It definitely is safe the way you have them, Paul! In a perfect world, the turn buckles would be perfect vertical, but this an imperfect world and not all campers have the attachment points in the same place. If you take a look at some of the installed pictures on the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK page, you can see most of them are at an angle. It's perfectly normal. Are you running any suspension enhancement on your Silverado?
Paul
9/27/2026
These tie downs are great, so easy to use. Camper never budged a hair
Andrew N.
9/27/2026
Kate F.
8/10/2026
Thanks for the pictures Rich. We will be reaching out =)
Bob
11/1/2025
I have not had any issues at all with the tie downs.
Heather A.
4/10/2026
Looks great! What kind of camper do you have?
Lazer S.
10/14/2025
Install looks great, Megan! Especially for it only taking two hours! They were moving. : ) Happy we confirmed what you found as well. Tie downs can be a pain in the rear with all the options out there. Now I do have to ask though, have you guys thought about any kind of suspension enhancement for the rear axle? It's a little hard to tell, but it looks like the back is sagging a bit in your last picture.
Lazer S.
10/14/2025
Clay
7/31/2026
A year later and I would not do anything different. Absolutely the best system available especially paired with the fast guns. The camper is solid mounted and does not move. Yet can still be off loaded in just a few minutes. Remember good stuff isn’t cheap and cheap stuff isn’t good.
Christopher H.
7/31/2026
Kate F.
6/5/2026
Great set-up Viviana!! Glad to see you went with the best =) Where did you go for your first trip?
Nick S.
1/12/2026
I love these TorkLift tie downs, and it is great to hear you are liking the quality as well. What kind of truck camper are you going to be running with these?
Kate F.
8/20/2026
We appreciate the kind words Charles! Where did you take the in-bed camper for the first trip?
Gwendolyn Y.
9/18/2025
Install looks great, Dale! Where're you headed off to now?
Gwendolyn Y.
10/1/2025
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Straw
8/24/2026
A year later, no issues with tie downs, except normal wear and tear and metal to metal wearrust progression. These tiedowns are designed great and fit function was clearly created by someone who knows not only design but install ! E-trailer is “the” place to buy rv, camper, towing etc products - the install videos are sooooo helpful ! Thx ET !