bing tracking image
Q & A Icon

MORRyde CRE3000 and Replacement Leaf Springs for 2019 Heartland Torque T314  

Updated 12/22/2025 | Published 10/26/2024

Question:

I am interested in upgrading to the Moryde cre3000 suspension. I also want to replace my leaf springs. Can you tell me the correct springs and suspension kit for my unit? 2019 Heartland Torque T314.

0

Expert Reply:

Hello Christine; to find the right parts for your 2019 Heartland Torque T314 you will have to take some measurements. For the CRE3000 it is based on your wheelbase measurement. If you have a 33" wheelbase with axles up to 8k you can use the # MR87ZR. For a 35" wheelbase you need # MR27ZR. If you have a different measurement please let me know in the comments below and I will help you find the best fit.

In the even that there is no good option available from MORryde it would also be helpful to know your equalizer measurements. Most importantly, the distance from the center of the left bolt hole to the center of the right bolt hole. The upgraded equalizers pretty much have the same performance across brands so matching your measurements is the best way to find the right one for your trailer.

I also recommend adding the MORryde Suspension Upgrade Kit for Tandem Axle Trailers while you're at it. The correct kit depends on your current shackle strap measurements which are measured center hole to center hole. For 2-1/4" use # MR46ZR and for 3-1/8" # MR76ZR. This kit comes with wet bolts, bronze bushings, and 1/2" thick shackles.

To find the right replacement leaf springs you need to know your axle capacity and either the spring eye or flat measurement. If you don't know your axle capacity check the axle tag to see if it is listed. If you have a serial number the axle manufacturer can find this information for you. For the measurement, I recommend the flat measurement since it removes the guess work.

Check out the article below which explains how to measure. Once again, If you can add your axle capacity and measurements to the comments below I would be happy to help you find the right leaf springs.

expert reply by:
0
Robin H
Robin H. profile picture
Etrailer Expert

Robin H.

12/22/2025

Hey Christine, were you able to get the wheelbase and shackle strap measurements for your Torque T314? Once you have those details, I can help confirm the right CRE3000 and leaf springs for your setup. Let me know what you find so we can narrow it down.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>