Replacement Storage Plate And Hardware for An etrailer XHD Tow Bar

Question

Question:

I have the eTrailer XHD 10.5k telescoping non binding tire bar, I turned too sharp, I guess, and the nipple that rests in the yellow plate with holes, both got damaged, I need a new yellow plate and a few nipple replacement parts.

asked by: Jason A

0

Expert Reply:

Hey Jason,

Each storage plate # DM35VR is also going to have a pin # DM23VR with two washers, a retaining pin # DM65VR, and a compression spring # DM95VR. The head of the pins would be the little nipple you were referring to that slips into the storage plate.

expert reply by: Kevin C

0

Jesse M.

12/22/2025

Hey Jason, how did things go with the new storage plate and pin parts for your XHD tow bar? Did they fit and get your setup working again? Your update could make it easier for the next person with the same issue.

Reply

Answer 1

Yes we actually have all the parts you are looking for. Replacement Storage Plate #DM25VR Replacement Compression Spring #DM95VR Replacement Grooved Clevis Pin #DM45VR Replacement Retaining Ring #DM65VR Replacement E-Clip #DM55VR Replacement Button…

view full answer...

Answer 2

Yes, the Roadmaster High-Low Adapter for Tow Bars part #RM-072-2 can be used to turn the 4" drop into a 2" drop if used in the rise position.

view full answer...

Answer 3

Hey Ron! It sounds like you need the Replacement Storage Pin for Demco and etrailer Tow Bars item #DM23VR. This works with all of the etrailer XHD Non-Binding Tow Bars like item #e94ZR. I attached a picture below where I circled the pin which item…

view full answer...

Answer 4

Hello Shane, thanks for reaching out. I can absolutely provide a full list of parts for flat towing your 2017 Chevy Colorado 4x4 Z71 Diesel. Here is what I recommend: - etrailer Invisible Base Plate Kit - Removable Arms #e98966 - etrailer XHD…

view full answer...

Answer 5

Thank you for your question, Stef! The Roadmaster StowMaster Tow Bar part #RM-501 doesn't come with the baseplate (the part that attaches to the frame of the vehicle). I'm more than happy to find the parts you are needing. Comment with your…

view full answer...

Answer 6

Hello John, Making the switch over to the SmartPlug is a smart idea =) On the fitment side, yes, the SmartPlug #SM67FR inlet will fit your trailer. SmartPlug inlets are designed specifically to replace the standard RV twist-lock shore power inlet and…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

Hey, Bill. If you’re not installing a supplemental braking system, like part #DM86VR, then the answer is no, you won’t need to install a charge line kit (part #RM-156-25). You will, however, want to double-check your owner’s manual for the exact…

view full answer...

Answer 9

Roadmaster makes a base plate kit that is designed specifically for the Rugged Ridge bumper like you have which is part #1437-3 which you could attach a Roadmaster tow bar like the Falcon 2 #RM-520 directly to.

view full answer...

Answer 10

I did some checking and you can safely flat tow your 1998 Nissan Frontier 4x4 with a 5 speed manual transmission as-is without damaging any transmission components. The Roadmaster XL Base Plate Kit #327-1 that you referenced would also be the correct…

view full answer...

Replacement Storage Plate And Hardware for An etrailer XHD Tow Bar

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching