Replacement Retaining Ring for Demco and etrailer Tow Bars - Qty 1

Video Transcript for Feature Review Replacement Retaining Ring for Demco and etrailer Tow Bars

Michael: Hi there. I'm Michael, with etrailer.com. Today we're going to take a quick look at the replacement retaining ring for your Demco and etrailer tow bars. This is going to replace one retaining ring that originally came on your Demco or etrailer RV-mounted tow bar, that will help to hold that pin in place so that you can close your arm, retract it, even if it's in the bound position. So that's a very important pin, and you don't want it to wiggle free, come loose. So this clip is going to be very important to make sure that that pin stays in place.

This is going to work for several different Demco and etrailer tow bars, including the Demco Victory series tow bars, the Commander, Commander II, Dominator, Excali-bar, Excali-bar II and Excali-bar III, as well as the etrailer SD and XHD tow bars.Very easy to get installed onto your pin. The pin will have that slotted portion there. So after you put that in place, you'll just slide this onto that slotted portion, apply a little pressure, it will click in place to make sure that that pin is not going to wiggle free. Now, with this part number, you're only going to get the clip. If you need the pin as well, that is sold separately here at etrailer.com.

You can find it using that part number that you see on the screen there. But if you are needing a replacement, these are exact replacements from Demco, so you can trust it's going to work with your tow bar, not going to have to worry about compatibility issues or anything like that.So that's going to complete our look for today. Again, I'm Michael, with etrailer.com. Thanks for watching.