Troubleshooting 2023 Tesla Model Y Turn Signal and Dashboard Notification with Reverse Light Product
Updated 01/12/2026 | Published 09/06/2024
Question:
2023 Tesla Model Y. I have added LED light in the trailer hitch for better reverse lighting. It is plugged into the trailer lighting. No trailer is attached. Now getting fast turn signals and improper trailer light wiring notification on the dashboard. I think this is because the only occupied trailer light circuit is the reverse light. There are no resistors or lights on the other circuits. Any ideas on how to remedy the warning light and the fast turn signal flashing? Thanks!
asked by: Rob
Expert Reply:
Hey Rob, thanks for reaching out!
From my end the best way to start is adding the Load Resistor Kit # DI34ZR to try to get the reverse light to "look" normal to your 2023 Tesla Model Y. My only hesitation with this method is that since you're only using the reverse light circuit it may still throw a code.
Generally, vehicle-side trailer wiring harnesses will look for the running and turn signal circuits to be active to know when a trailer is connected which is why I think your Tesla is having a hard time.
If the load resistor kit doesn't work then I recommend finding a light solution that uses more circuits.
Product Page this Question was Asked From
Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2
- Accessories and Parts
- Trailer Lights
- Load-Resistor Kit
- Diamond
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: 7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs
- Q&A: 7-Way to 4-Way Adapter with LED Resistor Solution
- Video: Review of TowSmart Custom Fit Vehicle Wiring - Wiring Adapters - TS32ZR
- Shop: TowSmart Plug-In Simple Custom Wiring Adapter for Trailer Brake Controllers - Ford
- Shop: 12V PWM Filter for RV Backup Camera Systems - Hardwire
- Shop: Peterson Load Resistor Harness for LED Turn Signals - Male and Female PL-3 Plug - 50 Watt - 10 Ohm
- Shop: Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2
- Shop: TowSmart Plug-In Trailer Connector Adapter w/ Wire Tester - 4-Way Flat to 7-Blade
- Q&A: How Do I Install Load Resistors for the LED Lights on my 2007 Dodge 3500 Flatbed
- Q&A: Are Load Resistors Required when Adding LED Lights to a Trailer
- Q&A: How to Keep LED Turn Signal Lights on Toolbox From Flashing with Brake Pedal Pressed
- Q&A: Troubleshooting Hyper Flashing Trailer Lights on Mercedes-Benz Sprinter Van
- Q&A: Which Folding Handrail Is the Strongest? A Stainless Steel or Aluminum One?
- Q&A: Trouble Finding Brake Light Wire on a 2025 Ford F-150
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: How to Choose the Right Trailer Hitch Class
Jerred H.
1/12/2026
Hey Rob, how did things go after trying the load resistor kit on your Model Y’s reverse light circuit? Did it help clear the warning light and fix the fast turn signal issue? Your results could really help others running similar LED setups.