Does Coating Need To Be Removed From Rotor Before Use
Updated 01/12/2026 | Published 09/06/2024
Question:
do you have to take the coating off the brake area
asked by: Russ B
0
Expert Reply:
Hi Russ; the DeeMaxx 10" Hub/Rotor Assembly # DE49VR is ready to go as is. You do not need to remove any of the coating since the brake pads will do that work for you. This also ensures that the minimal amount is removed and exposed to help prevent corrosion.
expert reply by:
Robin H
0
Product Page this Question was Asked From
DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- DeeMaxx
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Search Results: l68149 / l44649
- Search Results: l44649
- Search Results: l68149
- Search Results: 58846 seal
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Shop: Timken Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Replacement Trailer Wheel Bearing - L44643 - Qty 1
- Q&A: Why Are There Holes in the DeeMaxx 10" Hub-and-Rotor Assembly
- Search Results: deemaxx trailer brakes
- Search Results: spindles only trailer axles
- Search Results: deemaxx trailer hubs and drums
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: How to Choose a Trailer Brake Controller
- Shop: Brake Controller
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
Explore Expert Info
![Our Expert]()
on Trailer Hubs and Drums
on Trailer Hubs and Drums
Robin H.
1/12/2026
Hey Russ, how did things go with the DeeMaxx hub and rotor assembly after leaving the coating on? Your update could make it easier for the next person wondering about prep before use.