Will 32 Inch TorkLift SuperTruss Extension Work to Pull Boat Trailer

Question

Question:

Hello, I am looking at youre super hitch hitch extension and trying to see what would be best for my set up. I have a 2003 f350 super duty. I carry an arctic fox 990 camper on it. I want to pull my 24ft cabin cruiser boat at the same time. Would the 32 inch extension work. Thank you.

asked by: Josh C

0

Expert Reply:

Hi Josh,

Yep, the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 32" Long # TLE1532 can absolutely work to tow a boat trailer.

This has a 6,500 lb towing and 650 lb tongue weight capacity with the SuperHitch Original or Magnum hitches, so as long as your boat and trailer don't exceed those capacities the # TLE1532 will work for you.

expert reply by: Kyle S

0

Lazer S.

1/12/2026

Hey Josh, how did the 32-inch SuperTruss extension work out for towing your cabin cruiser with the camper on your F-350? Your update could make it easier for the next person setting up a similar rig.

Josh C.

1/12/2026

@LazerS It worked out great. We live in the PNW and travel through tough roads with very tight corners sometimes. Had zero issues.

Lazer S.

1/12/2026

@JoshC Nice! I grew up going to the mountains in Southern and Central California, so I know how the roads are. And my pops drove way too fast on them for comfort most of the time. : P Let us know if there is anything else we can help with!

Answer 1

Hello Will, thanks for reaching out. The correct TorkLift tie down set for your 2024 F350 crew cab long bed is part #TL87DR. The #TL54VV you mentioned comes with the correct rear tie downs F3008, but not the correct front tie downs for your F350. The…

view full answer...

Answer 2

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 11

Hey Jack, yes the Torklift camper tie downs part #TL63PR are the correct set for your 2024 Ford F-350 Tremor with a short bed and factory hitch. The turnbuckles part #TLS9526-2 that you referenced as well would be a great set that matches what you…

view full answer...

Answer 12

First you will need to replace your factory hitch on your 2024 Ford F-350 with the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL27CR. Then you will be able to attach the Rear Tie-Downs #TLR3504 to their receiver. For the front we have the…

view full answer...

Will 32 Inch TorkLift SuperTruss Extension Work to Pull Boat Trailer

Product Page this Question was Asked From

Continue Researching