Timbren Suspension Enhancement For 2024 Ford F350 Dually 4x4 With Truck Bed Camper

Question

Question:

I have a 2024 f350 dually 4x4 with payload of 5372 , with a truck camper that weighs 4090 and pulling a boat with tongue weight 2-300 pounds . What bump stop you recommend ? It has factory sway bar

asked by: Jeff

0

Expert Reply:

Hello Jeff, thanks for reaching out. For your 2024 F350 Dually 4x4 I recommend the Timbren Suspension Enhancement System # TFRTT350J. This is a severe service kit which is intended for vehicles just like yours that have a constant load in the bed like a truck camper or salt spreader. Especially considering the added tongue weight from your trailer, you will definitely want the additional support from the severe service kit.

expert reply by: Jesse M

0

Jesse M.

1/27/2026

Hey Jeff, how did the Timbren severe service kit work out on your F350 with the camper and boat load? Your results could really help others trying to balance similar setups.

Jeff

1/27/2026

@JesseM Hey Jesse I installed my timbren myself . Easy install. With timbren an sway bar I can stay with traffic at any speed. My wife get car sick easy so we was Leary of purchasing truck a truck camper. I told her I’d solve the sway , with the timbren there’s minimal sway. Very happy with this product

Jesse M.

1/28/2026

@Jeff Hey Jeff, thanks for sharing! Glad to hear the Timbren install went well, and that you are seeing such noticeable results. My wife gets car sick easy too so those are great tips. Thanks again for the feedback!

Answer 1

Hi Dana; the Timbren #TFR250SDJ are 6-7/8" tall including the mounting bracket. I see you went ahead and ordered the #TFRTT350J instead. Just a heads up, this is the severe service kit so it is designed for a constant heavy load like a slide-in…

view full answer...

Answer 2

Great question, Bret! The Timbren Kit #TFR250SDJ is for a standard pickup while the Timbren Kit #TFRTT350J is for Severe Service vehicles so you would want the 250 in this case. Since you said you want to retain a factory ride quality when unloaded I…

view full answer...

Answer 3

There are two Timbren systems for your 2023 Ford F-350, like you said, with the best definitely being the following part number: - Timbren Suspension Enhancement System #TFR350SDJ The reason for that is the #TFR350SDJ is designed for standard pickups…

view full answer...

Answer 4

For your customer with a 2019 Ford F-250 Super Duty with a consistent load in the bed of the truck the best Timbrens are the Timbren Suspension Enhancement System #TFR250SDJ. These have an 8,600 lbs capacity so they are going to offer a ton of…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Timbren Suspension Enhancement For 2024 Ford F350 Dually 4x4 With Truck Bed Camper

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching