Will Yakima Replacement Hardware Kit for Fairings Fit Yakima HD Bars

Question

Question:

Will this replacement hardware work with the Yakima HD bar?

asked by: Patrick

0

Expert Reply:

Hey Patrick, the Replacement Hardware Bag for Yakima Fairings part # Y8870044 only fits the Yakima round crossbars. The hardware kit that fits the HD bars and basically all other bar shapes is the part # Y97ZR.

expert reply by: Jameson C

0

Jameson C.

1/27/2026

Hey Patrick, did the hardware kit for the Yakima HD bars end up fitting your setup the way you needed? Knowing how it worked out could help others trying to match their fairing to those bars.

Answer 1

While we do have an option for you, we do not carry any saddle-style, flat style, or j-style carriers that are confirmed to fit the Yakima LongArm Bed Extender. This is because the 2" diameter of the LongArm is too thick for those carriers.…

view full answer...

Answer 2

Yes the Yakima WindShield Fairing for Roof Racks #Y05017 that you referenced will fit around the larger diameter Yakima HD bars you mentioned.

view full answer...

Answer 3

We sell the replacement wingnuts for the Yakima Fairing in the part #Y8870044. We do not sell the wing nuts by themselves though.

view full answer...

Answer 4

The Replacement Hardware Bag #Y8870044 is the the hardware kit that is designed to work with your Yakima Fairing 8007047. The hardware is only designed to work on round crossbars. The Replacement Windshield Bracket Assemblies #Y97ZR that you found…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Will Yakima Replacement Hardware Kit for Fairings Fit Yakima HD Bars

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching