How Can I Install The Tekonsha Primus IQ In A 2023 Lexus GX460?

Question

Question:

I just purchased a Tekonsha 90160 Primus IQ and need the harness to connect to the factory plug in a 2023 Lexus GX 460. Can you recommend which one to use? i cant seem to find one for anything after a 2020 which is the 3040P See attached picture for the EOM plug

asked by: David S

0

2023 Lexus GX460 Factory Brake Controller plug
(click to enlarge)

Expert Reply:

Hello David, thanks for reaching out. Unfortunately, Tekonsha does not make a custom brake controller adapter for the 2023 Lexus GX460. You can still install the Tekonsha Primus IQ # 90160 but you will need to remove the factory plug and hardwire the controller.

expert reply by: Jesse M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 8

Hey John, thanks for reaching out! If the 4-Way on your 1996 Ford F-150 is from the factory then the only wire splicing you'll need to do is with the Adapter #37185, which plugs into your 4-Way and then you'll connect the rest of the wires to…

view full answer...

Answer 9

Hey John, thanks for reaching out! Before I dive into it, I just want to throw it out there that the Curt Spectrum #C36QV, Tekonsha Voyager iD #TK86DR, and the Redarc Tow-Pro Elite #RED65CR are all great brake controllers and you'll be happy with…

view full answer...

Answer 10

We can definitely help install a brake controller and 7-way on your 2024 Toyota Grand Highlander but first the brake controller I recommend is the Redarc Tow Pro Liberty part #RED24FR with the install harness part #RED69FR. As this controller puts…

view full answer...

Answer 11

Hi Mike! Do you want a completely hidden hitch or one where only the receiver is visible? The Curt #C64NR you looked at has a concealed cross tube so you will only see the receiver hanging down at the rear. The Hidden Hitch by Draw-Tite #DT76GR will…

view full answer...

How Can I Install The Tekonsha Primus IQ In A 2023 Lexus GX460?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching