Recommended E-Bike Bike Rack That Has A Ramp And Can Mount To The Seat Post

Question

Question:

I am looking for an ebike hitch mount 2 rack that holds 2 ebikes, has a ramp, and it secures the ebike at the seat post. Any recommendations? Thank you

asked by: Terry T

0

Expert Reply:

Hey Terry,

The Hollywood Racks Destination E Bike Rack for 2 Electric Bikes # HLY66ZR can hold two e-bikes, has a ramp, and has adjustable clamps that are meant to attach to the top tube but could be turned to clamp onto the seat post instead. It has a per bike capacity of 70lbs and can accommodate tires up to 4.5" wide. It comes with an locking anti-rattle hitch pin to prevent the rack from rattling around in the hitch or any one from taking off with your bike rack.

I've attached a short demo video below where AJ will show you it in use and go more in-depth with its features.

expert reply by: Kevin C

0

Kate F.

1/19/2026

Hey Terry, how did the Hollywood Racks Destination E bike rack work out for your two e-bikes? Did the seat post clamp setup hold them securely during transport? Your feedback could help others looking for a similar rack.

Terry T.

1/19/2026

@KateF Kate, We are very happy with the bike rack! It holds the e-bikes very securely and the seat clamp is a great design because it is better than having the clamp attach to the frame. Also, the ramp is very handy! I highly recommend this rack! Terry T.

Kate F.

1/20/2026

@TerryT Thanks so much for taking the time to respond Terry! I am happy to hear that you are still pleased with your bike rack, Kevin definitely helped you pick out a good one. The ramp is very handy with those heavy e-bikes. -Happy Riding =)

Answer 1

I have a few different e-bike racks for you to check out and the differences really just boil down to the weight of the rack and the features it comes with. The first recommendation I have is the Hollywood Racks Destination E Bike Rack #HLY66ZR which…

view full answer...

Answer 2

Hey Richard, thanks for reaching out! I recommend going with the Hollywood Racks Destination E Bike Rack #HLY66ZR because it uses clamps to secure the bikes by the frame, it comes with a ramp, and it's priced in the mid-range area. If you're…

view full answer...

Answer 3

Hi Tom, First, that's a reallllllly nice bike you have, and we can get you set up with an equally high-quality rack to accommodate both it and your wife's step-through with fenders. Due to the fenders, what you'll need is a bike rack that…

view full answer...

Answer 4

You can use a 7-Way and 4-Way connector at the same time just as long as you are not overloading the light circuits. If your camper has a lot of outside lights like running lights, and brake/stop/turn lights then the lights that perform the same…

view full answer...

Answer 5

I do have an option for you, but since your rack wasn't designed for any sort of lights the best bet is going with the #e98943-44LED which has lights and a license plate mount, but won't be too hard to get installed. Another customer…

view full answer...

Answer 6

While the Thule T2 Pro XTR Bike Rack #TH83JV is a great bike rack, since your Scott e-bikes have the front fenders you'll either need to remove them to use the rack or we'll need to look into another bike rack. The reason why it isn't…

view full answer...

Answer 7

Hi Michael, There is a good option for a bike rack that has a 60 lb per-bike capacity and also works in your 1-1/4" hitch, from Swagman: - Swagman Current Bike Rack for 2 Electric Bikes #S76SR The #S76SR even has a ramp so you can more easily…

view full answer...

Answer 8

The Timbren Silent Ride Suspension for Tandem Axles, #TSR14KT01, was designed to eliminate the problems that traditional leaf spring trailer suspension encounter on travel and 5th wheel trailers. (The Silent Ride system will bolt right up to the…

view full answer...

Answer 9

The SuperSprings Mounting Kit for OEM Leaf Springs Above the Axle #MXKT is designed to be used with a SuperSpring Custom Suspension like the #SSA28 and allows you to mount the springs above the axles instead of below them with the rest of the leaf…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended E-Bike Bike Rack That Has A Ramp And Can Mount To The Seat Post

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching