Picking Out the Correct Replacement Gooseneck Ball for a Gooseneck Hitch

Question

Question:

Im trying to find the right gooseneck ball for my gooseneck hitch

asked by: Justin B

0

Expert Reply:

Justin, what Gooseneck hitch do you have? Most Goosenecks use a 2 5/16" ball like # C60628 but fit is going to be dependent on what Gooseneck hitch you have.

So if you can let me know what you have, then I'd be happy to get the correct replacement for you.

expert reply by: Bryce D

0

Justin B.

7/31/2024

It is a una goose hitch system

Bryce D.

8/1/2024

@JustinB Gotcha, so unfortunately it does not look like we carry replacements for this brand since we don't actually carry that brand.

Kyle B.

9/9/2025

@JustinB Did you ever find a replacement ball for your una goose hitch? I have a una goose hitch in my truck and am also trying to find a replacement ball.

Answer 1

The B&W Flatbed Adapter #BWRVK3050 will fit into any B&W Turnoverball gooseneck like the #BWGNRK1394. Depending on your truck a better option might be to use the B&W Gooseneck Hitch for Flatbeds #BWGNRK1500. It installs by welding to the…

view full answer...

Answer 2

To flat tow your 2022 Ram 3500 behind your motorhome you will need at least 5 main parts. Those would be a base plate kit, tow bar, safety chains, tow bar wiring, and supplemental braking system There may be additional parts needed, you will want to…

view full answer...

Answer 3

Yes, they do. To add a 3" gooseneck ball to your Ram factory puck system you will want the Curt Pop-In Ball for Factory Chevy/GM, Ford, Nissan, and Ram Underbed Gooseneck Hitches - 3" item #C60628.

view full answer...

Answer 4

A 3 inch hitch ball that is compatible with your Ram OEM Gooseneck Prep Package is the Curt Pop-In Ball for Factory Chevy/GM, Ford, Nissan, and Ram Underbed Gooseneck Hitches - 3" #C60628. The polished chrome plating is corrosion resistant and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Picking Out the Correct Replacement Gooseneck Ball for a Gooseneck Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching