What Vehicles Will The Blue Ox Trailer Hitch Receiver BLU63UR Fit

Question

Question:

what other vehicles willthe BLU63UR hitch fit . I bought on years ago and never put it on the vehicle. I want to sell it.

asked by: John H

0

Expert Reply:

Hello John. The Blue Ox Trailer Hitch Receiver # BLU63UR will fit the following vehicles:

2006 - 2018 Toyota RAV4

expert reply by: Jesse M

0

John S.

7/17/2024

thanks so much for the help.

Tommy S.

7/14/2025

I'm installing this on a Toyota RAV4 2018 it's a RAV4 Le and the spare tire tub is too big I can barely squeeze it around it and I've got about a half inch to 3/4 of an inch to spread it open on either side to try and line up the bolts is there anything different than I should be doing

Jesse M.

7/14/2025

@TommyS I have never heard of the spare tire tub presenting an issue when installing a hitch on a 2018 RAV4. The clearance will be tight. As long as the bolt holes line up, and the hardware can be torqued to spec you will be good to go.

Answer 1

I compared ground clearance measurements for all of the 2" trailer hitch receivers we have for your 2017 Toyota RAV4 and found that the Curt Trailer Hitch Receiver part #C13406 has a great clearance from the ground to the top of the hitch…

view full answer...

Answer 2

Yes, we do. I recommend Curt, part #C13406. It's a fit for all of the 2018 RAV4's including the Hybrid model like you have. I like how the crosstube is hidden behind the RAV4's bumper and all you see is the receiver tube sticking out.…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

For your 2018 Toyota RAV4 with the 2.5L I4 engine the Kat's Heaters Custom Fit Engine Block Heater #KH11813 will work perfectly. This cartridge heater will clip right into the cavity of your engine block and submerges in the coolant to keep them…

view full answer...

Answer 5

Paint finish and price. Curt makes our house brand hitches so all the specifications and capacities for both the Curt Hitch item #C13149 and the etrailer item #e98864 are identical. Both of these hitches are confirmed to fit the 2014 Toyota RAV4 and…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Vehicles Will The Blue Ox Trailer Hitch Receiver BLU63UR Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching