Trailer Hitch And Bike Rack For A 2012 Ford Escape

Question

Question:

LOOKING FOR A HITCH INSTALL KIT AND BIKE RACK FOR A 2012 FORD ESCAPE

asked by: Chris M

0

Expert Reply:

Hello Chris. For your 2012 Ford Escape I recommend the Curt Class 3 Hitch # 13650. This hitch has a 2" receiver which is standard and will give you a ton of options for a bike rack.

My personal favorite bike rack is the Kuat NV 2.0 # BA22B. This rack will work with the 2" hitch and it can carry 2 bike weighing up to 60 lbs apiece. So this will work with virtually any bike, even heavier e-bikes. It will also accommodate larger tires up to 5" wide. The Kuat racks are top quality, and it will look cool on the back of your car. I have linked a few install videos for you below which you may find useful.

expert reply by: Jesse M

0

Jesse

7/17/2024

700 dollars for a bike rack is a little insane. Any cheaper options?

Jesse M.

7/17/2024

@Jesse Oh I hear you. The Kuat racks are nice but they are expensive. There are a lot of great options that will cost a lot less. Knowing what kind of bikes you have will really help me make a good recommendation. If you have just standard road bikes or mountain bikes, take a look at the Hollywood Racks Destination Bike Rack # HLY94FR. This is a solid platform rack that can hold two bikes weighing up to 35 lbs apiece. It will accommodate tires up to 3" wide. Just a great all-around rack for a very competitive price. If this will not work for you, or if you have some type of specialty bikes just let me know what you have, and I am happy to look into it.

Chris

7/17/2024

@JesseM purchases both the hitch and 200 dollar bike rack, thanks for the help

Jesse M.

7/18/2024

@Chris Anytime! Feel free to reach out if you ever need anything else.

See All (4) Replies to Jesse ∨

Answer 1

The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Trailer Hitch And Bike Rack For A 2012 Ford Escape

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching