Is There A Plug To Cover 2" Hole To Install Curt Hitch CU74FR On 2023 Jeep Gladiator?

Question

Question:

I bought a curt hitch, I punched out where the ball goes like recommended. Do you have a cover to keep water and dirt out of hole of bumper. 2023 jeep gladiator willys

asked by: Curtis R

0

Expert Reply:

There is no cover to keep out water and debris on the Curt # CU74FR. When We've installed it we actually removed the bumper to not have to drill that hole. It looks like you should be able to find a 2" grommet from a home improvement store to plug the hole, but you'll probably need to do some DIY'ing to make it fit perfectly.

expert reply by: Samuel C

0

Samuel C.

2/3/2026

Hey, did you end up finding a grommet that fit the hole in your Gladiator’s bumper? Knowing what worked could help others trying to keep water and dirt out after adding that Curt hitch.

Curtis R.

2/3/2026

No, I didn't find anything made for it. I ended up using a jeep badge to cover it.

Samuel C.

2/3/2026

@CurtisR Sounds like a cool fix! Thanks for reporting back.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

Hello George, Thanks for writing in. It sounds like the spring bars on your Equal-i-zer system #EQ37120ET are loaded with too much tension, which is why they are staying trapped under the L-brackets and won’t swing outward or lift up easily. This is…

view full answer...

Answer 8

Hi Michael! With the capacity and price of the Trailer Valet Adjustable 2-Ball Mount - 2" Hitch - 6" Rise, 6" Drop - 14K #TV26FR, it's pretty hard to beat. The only way to possible beat it is with the etrailer Adjustable 2-Ball…

view full answer...

Answer 9

Hey Myron! With that 2-1/2" lift you will need the Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 2" Lift #AL52420. The spacers will install underneath the cradle on the #AL88FF. I also recommend adding an air…

view full answer...

Answer 10

Yes, a center cap like what you have that measures 4.25 inches in diameter would fit the wheel part #AM20535 that you referenced. It has a pilot diameter that is 4.27 inches in diameter so it would fit well with a 4.25 inch cap.

view full answer...

Is There A Plug To Cover 2" Hole To Install Curt Hitch CU74FR On 2023 Jeep Gladiator?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching