How To Install A Single Feed Diode To Prevent Backfeeding
Updated 02/03/2026 | Published 07/06/2024 >
Products Featured in This Question
Question:
Hello, I want to install a one way diode to prevent feedback on my Brinkley RV. Do you guys have any instruction on how to do this?
asked by: Robert M
0
Expert Reply:
Hi Robert,
Diodes like the Roadmaster Single Park Light Diode # RM-690 you were looking at simply get spliced inline with whichever light function you're wanting to prevent feedback on using the included spade terminal connectors. You'll want to place the diodes close to the light to limit the amount of room for feedback.
expert reply by:
Kevin C
0
Product Page this Question was Asked From
Roadmaster Single Park Light Diode
- Accessories and Parts
- Flat Tow Wiring Harness
- Diodes
- Roadmaster
more information >
Continue Researching
- Q&A: Diode Recommendation to Prevent Trailer Battery From Backfeeding onto Vehicle Wiring
- Q&A: How to Install Roadmaster 690 Diode to Fix 12V Power Issue on 2024 GMC Sierra Denali
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Diode for Charging Line From Motorhome to Towed Vehicle (Toad)
- Q&A: What Converter Can I Upgrade To That Will Handle A 200Ah Battery?
- Q&A: What Is the Measurement of the Bolt Holes on the SeaFlo Battery Disconnect?
- Q&A: Diode for Preventing Trailer 12 Volt Accessory Circuit From Backfeeding
- Q&A: How Much of Each Gauge of Wire Fit Inside a Wire Loom Comfortably
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Diode Installation Instructions for Dinghy with Combined Tail Light Wiring


Robin H.
2/3/2026
Hey Robert, how did things go with wiring the diode on your Brinkley RV? Sharing how the splice worked near the light could help others trying to stop feedback on their setup.