TorkLift Tie-Downs and Turnbuckles For a 2020 Toyota Tundra With 5-1/2' Bed

Question

Question:

I have a 2020 toyota tundra with a 5.5ft bed and cant find the front and rear torklift cabover camper mounts.

asked by: Timothy

0

Expert Reply:

You are going to need the TorkLift Tie-Downs # TL89FV for your 2020 Toyota Tundra with the 5-1/2' bed and factory receiver. I recommend pairing these with the FastGun Turnbuckles # TLS9529-2-LK to secure your cabover camper.

expert reply by: Bud M

0

Jesse M.

2/3/2026

Hey, how did the TorkLift tie-downs work out on your Tundra with the 5.5-foot bed? Did the FastGun turnbuckles make it easier to secure your camper? Your update could make it easier for the next person with the same setup.

Answer 1

One of the differences between Draw Tite adapter #HE18 and the Curt model #C45796 is the length. They both have 18" between hitch pin hole and the ball hole, the Curt is overall a bit longer. The Curt has an overall length 23-1/4" and the…

view full answer...

Answer 2

We do offer hitch extenders/adapters that will fit into a 2-1/2-inch hitch and reduce the receiver opening size down to a 2-inch size but none of these is 18-inches long. There is another way to go that might work for your application. You could use…

view full answer...

Answer 3

The #D30 you referenced is for hitch fabrication and it sounds like you simply need a hitch extender. There is an 18 inch extension, the Curt Extender for 2" Receivers -18" Long #C45796 which you can use with a bike rack. The only thing to…

view full answer...

Answer 4

Hey Brandon. The longest hitch extender we have is the 14" long Gen-Y Hitch item #GY89SR. This fits a 2" receiver and has a 10,000 lbs capacity but it will reduce your hitches capacity by 50% like all hitch extenders do. The 15-3/4"…

view full answer...

Answer 5

A hitch extension does cut your trailer hitch capacity by 50 percent, but for as light of a trailer as you have and how heavy duty your tow vehicle is that wouldn't be an issue. So yes, a 14 inch hitch extension like the #C45795 would be a solid…

view full answer...

Answer 6

Yes, your 2000 Ford F-350 can use a ball mount with a 2 inch drop like #C45310 with an 18 inch extension, the Curt Extender #C45796. Keep in mind an extender will reduce the capacity of your trailer hitch, the Reese by 35 percent and the Curt by 50…

view full answer...

Answer 7

The only other extension option we carry besides the Torklift SuperTruss extender that does not cut your tongue weight in half is an extra long ball mount. Traditional extensions such as part #C45796 cut the tongue weight capacity of the hitch on the…

view full answer...

Answer 8

Hey, Allen! All depends on what you're towing. Would you be able to give me some information such as what kind of trailer(s) your towing, is there going to be any sort of gear or equipment in the truck bed, and lastly does your truck have any…

view full answer...

Answer 9

The SumoSprings Solo Custom Helper Springs #SSR-610-47 with a capacity of 1500-lbs will be a good choice since that camper is really only going to have a tongue weight of around 240-lbs maximum. If you're also carrying loads in the truck bed,…

view full answer...

Answer 10

So long as the suspension in the rear of your Tundra has not be modified, I recommend the SumoSprings Solo Custom Helper Springs item #SSR-610-54. These have a 2,800 lbs capacity that will keep the rear end level when you have your truck weighted…

view full answer...

Answer 11

When adding suspension upgrades that replace the jounce bumpers on any vehicle it is hard to beat the SumoSprings because we have found that they have the least amount of impact when your vehicle isn't loaded. For your 2018 Toyota Tundra I…

view full answer...

Answer 12

For your 2018 Toyota Tundra, I recommend the SumoSprings Solo Custom Helper Springs item #SSR-610-47. These are the black 1,500 lbs capacity ones. They will keep your Tundra level when you're towing or hauling a heavy load. You will not be able…

view full answer...

TorkLift Tie-Downs and Turnbuckles For a 2020 Toyota Tundra With 5-1/2' Bed

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching