Replacement Tarp for Tonneau Cover on 2013 Toyota Tacoma

Question

Question:

I have a 2013 Tacoma 4 door full with 5 bed and need to replace tonneau cover tarp.

asked by: Pete P

0

Expert Reply:

Hi Pete; can you tell me what kind of cover you have now? If it is the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX555901 which fits the 2013 Tacoma with a 5' bed the correct replacement tarp is the # TX5559-CVR. If it something else please let me know and I will see if a replacement is available.

expert reply by: Robin H

0

Pete P.

7/9/2024

I am not sure how to tell what style. I just bought the truck last year but assume it's factory

Robin H.

7/9/2024

@PeteP if it is factory I would check with Toyota. Try looking under the cover for a tag or serial number, they usually stitch this in up by the cab. Anything with a brand and identifying number would be helpful.

Pete

7/10/2024

@RobinH I found a number: T0550 does this help? No other tag or marking.

Robin H.

7/11/2024

@Pete it looks like there is a TruXmart cover that matches that number and fits your truck. This isn't something we carry so we don't have parts for it. I wasn't able to find parts anywhere else either. Based on the lack of information for that brand I don't think they're in business anymore. More than likely you will need to replace it with one like the Extang Trifecta 2.0 # EX92905 which is also a soft tri-fold.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Hi Steve; the factory hitch on the 2013 Tacoma has the bumper brackets integrated into the hitch. You can replace it with the etrailer Trailer Hitch #e98850 but you will have to remove the old hitch and find new bumper brackets to complete the…

view full answer...

Answer 8

The aftermarket hitches for a 2011 Toyota Tacoma don't fit alongside the factory installed hitch; some trucks have hitches you can add on to OEM hitches that fit underneath the original. So I can't see any reason why you wouldn't be able…

view full answer...

Answer 9

Hey Mark, since folding tonneau covers like the etrailer part #e73DR end up adding height to the top of the bed rails near the front of the bed they are not ideal for towing a fifth wheel trailer as the nose of the trailer is most likely going to…

view full answer...

Answer 10

Hey Chris, No, there isn't an upgrade kit for your Generation 1 MORryde StepAbove RV Steps to make them a Generation 2. There is a Replacement Leg for MORryde StepAbove RV Steps - 2nd Generation #MR36DR, but because the Generation 1 steps'…

view full answer...

Answer 11

You sure do Thomas and good morning to you as well. The Mach 8 Plus units do indeed require a air distribution box or trim on the interior of your Grand Design. To replace your three Coleman Mach 10 15K AC units, you will need the following parts and…

view full answer...

Replacement Tarp for Tonneau Cover on 2013 Toyota Tacoma

Products Featured in This Question

Continue Researching