Recommended Trailer Hitch Wiring For A 2022 Hyundai Tucson

Question

Question:

I have a 2022 Tucson. It appears that this is a quick connect to a plug under the vehicle. Your site indicates it is for vehicles with a factory tow package. I do not have a factory tow package however others state All 2022 Tucsons have a quick connect so I am good to go with simply plugging the other end in to a U-Haul trailer. So, does this harness quickly connect without a factory tow package with no wire splicing and about 20 minutes of time? Is this wiring harness and my tow hitch all I need to be ready to rent a trailer? Thanks for the time.

asked by: Matt J

0

Expert Reply:

Hi Matt,

I can't confirm every 2022 Hyundai Tucson having the correct connector needed to install the Curt T-Connector Vehicle Wiring Harness # CU94FR, but you can watch Ryan's video below and check to see if you have the necessary factory harness.

If you don't have the factory wire harness then you'll need to go with the splice-in Curt # C59236 instead. Assuming your trailer doesn't have brakes the only other thing you would need would be a ball mount. Since you are renting the trailer and wouldn't have it available to measure and compare to the height of your trailer hitch receiver I recommend going with an adjustable ball mount like the # e66PR. It offers up to a 6" rise/drop so you'll definitely be covered for any trailers that your Tucson could pull.

expert reply by: Kevin C

0

Answer 1

The amp draw on the product pages for both the #118379 and the #C55379 wiring harness is how much draw the harnesses are designed by their manufacturers to handle. The amount of draw will be determined by the lights on your trailer. The Curt is…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Eric, I am not seeing any other messages from you so I wonder if there was maybe a typo in your email address. But anyway for a hitch the etrailer part #e24ZV would be a great option for your 2025 Hyundai Santa Fe. Then for trailer wiring the…

view full answer...

Answer 5

Good question, Todd! I looked at some pictures we have of the Curt #C37RV hitch installed on a 2024 Hyundai Santa Fe and I think I found a good way to do it. Take a look at the picture I have included and you will see what I am thinking (circled in…

view full answer...

Answer 6

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

view full answer...

Answer 7

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 8

Hey Frank, for your 2025 Hyundai Tucson the hitch I would recommend is the Curt part #C94WR which is mostly hidden, has great towing capacities, and also is priced lower. For trailer wiring I would then recommend the part #CU94FR for a 4-way or the…

view full answer...